52/63/72CC Gas Power Post Hole Digger Earth Auger Borer Fence Ground Drill/Bit

Description:

▲MULTI-PURPOSE: Can dig holes for fence posts, install mailboxes, build decks, plant trees, and more.

▲EFFICIENT: The post hole digger is capable of both simple post hole digging and deep trench digging. The two-stroke gasoline engine spins up to 7,000 rpm for precise, easy hole digging. The advanced vertical gearbox design also increases engine efficiency and reliability.

▲EASY TO OPERATE: Provides smooth starting and consistent digging force, plus high-quality rubberized handles for relatively stress-free operation, and the advanced vertical transmission design also increases engine efficiency and reliability.

▲EASY STARTING: Equipped with a manual recoil start easy fuel delivery system for quick pull start action and a large capacity fuel tank for long hours of operation.

▲PROFESSIONAL TOOLS: Maximum depth of 2.6 feet using a single auger bit, including different sizes of auger bits (4“6”8“12”) and extension rods (8“12”20 “) and standard shaft size of 3/4” for different trenching requirements, which can help you complete all digging jobs quickly and effortlessly.

Product Specification:

Engine: Single Cylinder, 2-stroke, air-cooled

Fuel mix: 25/1

Output Shaft Diameter : 20mm

Number of drills: 4

Drill Bit Size:

4":(diameter*length)4*32in/10.16*81.28cm

6": (Diameter*Length) 6*32in/15.24*81.28cm

8": (Diameter*Length) 8*32in/20.32*81.28cm

12": (Diameter*Length) 12*32in/30.48*81.28cm

Number of connecting rods: 3

Connecting rod size: length 8“/12”/20” (20.32/30.48/50.8cm)

Cylinder Capacity : 52/63/72cc

Power:1.51kw/7000rpm 2.2kw/7000rpm 2.4kw/7000rpm

Drill speed: 170*220r/min

Size:

50x21x34cm/ 19.69x8.27x13.39in

46x40x30cm/ 18x15.5x11.8in

50x40x25cm/ 19.7x15.4x9.8in

Package Included：

1 x Main Unit

4 x Drill Bit

3 x Connecting Rods

1 x Tool Kit

1 x Funnel

1 x Proportional Oil Pot

1 x Starting handle

NOTE:

1. Please close the damper before starting the cold machine, and open the damper during normal operation.

2. Before leaving the factory, we added butter to the gearbox. After working for a period of time, please add butter appropriately according to your use frequency.

3. When you are starting, please start quickly. Don't stop when pulling the rope, pull it slowly.

4. Before starting, press the oil bubble several times and check whether there is oil in the oil pipe.

5. When the cold machine starts, please close the baffle first, and then open the baffle for normal operation.

6. Please read the operating manual completely before use. And pay particular attention to the safety instructions included.

7. The machine will not be able to pump sauces that are too thick or have crumbs, such as peanut butter, cheese, mayonnaise, etc.

8. Please allow slight color difference caused by shooting light and 1-3 cm error caused by manual measurement, and make sure you don't mind before ordering.