Specifications :
Spacer Thickness: 2 inch or 50.8 mm
Vehicle bolt pattern: 4x156 mm
Wheel bolt pattern：4x156 mm
Thread Size：m12x1.5
Hub Bore: 131 mm
Number of Pieces: 4pcs
Fitment:
-Some ATVs require different bolt pattern for front & rear. please check the bolt pattern and studs of your ATV before purchase; ATV must have 10x1.25 threaded wheel studs
|
For |
2016-2022 Polaris General 1000 |
|
For |
2017-2022 Polaris General 4 1000 |
|
For |
2020-2022 Polaris General XP 1000 |
|
For |
2020-2022 Polaris General XP 4 1000 |
|
For |
2011-2014 Polaris Ranger 900 |
|
For |
2020-2022 Polaris Ranger Crew 1000 |
|
For |
2012-2015 Polaris Ranger Crew 900 |
|
For |
2015 Polaris Ranger Crew 900 6 |
|
For |
2016-2017 Polaris Ranger Crew 900-5 |
|
For |
2016 Polaris Ranger Crew 900-6 |
|
For |
2017-2022 Polaris Ranger Crew XP 1000 |
|
For |
2016 Polaris Ranger Crew XP 570-6 |
|
For |
2017-2019 Polaris Ranger Crew XP 900 |
|
For |
2016 Polaris Ranger Crew XP 900-5 |
|
For |
2016 Polaris Ranger Crew XP 900-6 |
|
For |
2017-2022 Polaris Ranger XP 1000 |
|
For |
2016 Polaris Ranger XP 570 |
|
For |
2013-2019 Polaris Ranger XP 900 |
|
For |
2015 Polaris RZR 4 XP 1000 |
|
For |
2014-2020 Polaris RZR 900 |
|
For |
2020-2022 Polaris RZR Pro XP |
|
For |
2020-2022 Polaris RZR PRO XP 4 |
|
For |
2018-2022 Polaris RZR RS1 |
|
For |
2015-2021 Polaris RZR S 1000 |
|
For |
2015-2021 Polaris RZR S 900 |
|
For |
2019-2020 Polaris RZR S4 1000 |
|
For |
2018 Polaris RZR S4 900 |
|
For |
2021-2022 Polaris RZR Trail 900 |
|
For |
2021-2022 Polaris RZR Trail S 1000 |
|
For |
2021-2022 Polaris RZR Trail S 900 |
|
For |
2021-2022 Polaris RZR Turbo S |
|
For |
2021-2022 Polaris RZR Turbo S 4 |
|
For |
2015-2021 Polaris RZR XP |
|
For |
2014-2022 Polaris RZR XP 1000 |
|
For |
2016-2021 Polaris RZR XP 4 |
|
For |
2014-2022 Polaris RZR XP 4 1000 |
|
For |
2013 Polaris RZR XP 4 900 |
Note:
1. Check Your Vehicle Bolt Pattern/ PCD, Hub Bore Size, Thread Pitch, Vehicle fitment compatibility is only a guide.
2. Measure the fender gap and stock bolt length to choose suitable thickness.
3. It is possible that your existing lug nut studs can be longer than the adapter itself, you may need to alter your existing studs if the adapters do not sit flush with the wheels. If the studs are longer than the adapter, and the wheels do not have a hollow spot in them, you may need to grind, or cut your existing lugs if you choose not to purchase shorter studs. Otherwise, the adapter bolt can't work as normal and will greatly shorten the bolt's working life and bring danger to you.
4. PLEASE CONFIRM what you actuall need, wheel spacers or wheel adapters, they are different. Wheel Adapters are used to change bolt patterns in order to properly fit wheels from one vehicle to the hub of a different vehicle.
5. Clean the studs thoroughly and remove any excessive dirt, oil, grease etc. Thread the supplied lug nuts to axle studs with TAPERED end facing towards the spacers. Install the nuts by hand ONLY and tighten them in a crisscross pattern. Do not use impact wrench. Recommended to use threadlocker.
6. Please check all lug nuts and bolts of the adapters after the first 50 -100 miles. They may get loose after long time running. Make sure you will recheck them every 3000-5000 miles and screw tight.
7. Returns are only accepted if unused and not installed.(ReturnsARE NOT ACCEPTED IF SPACERS-ADAPTERS HAVE BEEN INSTALLED TO YOUR VEHICLE)
