4pc Aluminum Hubrings | 54.1mm Car Hub to 73.1mm Wheel Bore | ID 54 | OD 73
$13.59
Brand
StanceMagic
Centerbore
54.1mm
Color
Silver
Fitment Type
Performance/Custom
Item Type
Aluminum Hubcentric Rings / HubRings
Material
Aluminum
Vehicle Centerbore
54.1mm
Wheel Centerbore
73.1mm
condition
New
WHAT ARE HUB CENTRIC RINGS? (Also called hubrings, hubcentric rings, centering rings) This device is installed between the vehicle's hub and the wheel center bore. The hubring fills in the gap between the hub lip and the centerbore of the wheel. This is assuming that your wheel's centerbore is not already centered around the hub.
WHY DO I NEED IT? You may experience steering wheel vibrations if your wheel's centerbore does not perfectly center on your vehicle's hub. Hubrings eliminate those vibrations by properly centering the wheel onto your vehicle's hub.
HOW CAN I CONFIRM FITMENT? - Hubrings have 2 measurements, typically in millimeters (mm). - The SMALLER of the 2 measurements is the INNER DIAMETER. In the case of this item, it is 54.1mm. This should match your vehicle's hub bore. - The LARGER of the 2 measurements is the OUTER DIAMETER. In the case of this item, it is 73.1mm. This should match your wheel's centerbore.
VEHICLE FITMENT Compatible with Mazda, Toyota, and Scion vehicles with a 54.1mm Hub. Your Wheel Bore must be 73.1mm. Message us with year/make/model if you have any fitment questions.
IMPORTANT NOTES - BUYERS ARE REQUIRED TO CHECK BEFORE PURCHASING - Buyers must ensure their Vehicle's Hub is 54.1mm. - Buyers must ensure their Wheel's Centerbore is 73.1mm. - If you are not unsure about fitment or the measurements, please do not guess. Send us a message and we are happy to help.
INSTALLATION ADVISORY Be sure to clean your hub prior to installation. Because of the tight tolerances of the hubrings (to ensure tight fit), a dirty hub could cause the ring to not fit.
For Vehicles with 54.1mm Hub AND Wheels with 73.1mm Bore
StanceMagic Hub Centric Rings made of CNC Machined billet aluminum. These hubrings will reduce or eliminate vibrations caused by a gap between your aftermarket wheel's centerbore and your wheel hub. Having a gap will prevent your wheel from centering properly during installation, leading to vibrations.
HUB RING INNER DIAMETER: 54.1mm (Your vehicle's hub lip diameter needs be this size)
HUB RING OUTER DIAMETER: 73.1mm (Your wheel's center bore needs to be this size)
Compatible with 2011-2017 Lexus CT200h. Compatible with Mazda 2016-2019 MX-5 Miata, 1990-1998 Protege. Compatible with Scion 2004-2006 xA, 2004-2007 xB, 2005-2010 tC. Compatible with Toyota 1983-1991 Camry, 1986-2005 Celica, 1987-2020 Corolla, 2000-2005 Echo, 2003-2014 Matrix, 1985-1989 MR2, 2000-2006 MR2 Spyder, 1997-2020 Prius, 2004-2020 Yaris.
IMPORTANT: Before ordering, measure your rim/wheel center bore and your vehicle hub lip size, and make sure it matches the hub centric rings specifications shown on this listing. Installation is simple and requires common tools used to remove/install rims and tires. NOTE that these can only eliminate vibrations caused by uncentered wheels. Vibrations may also be caused by improperly balanced or damaged wheels and tires, worn out joints, among others.
Quantity
4 pieces
Inner Diameter (Vehicle Hub Size)
54.1mm
Outer Diameter (Wheel Bore Size)
73.1mm
Material
Aluminum
Color
Silver
FITMENT INFORMATION
Compatible with vehicles with a 54.1mm hub that needs to center a wheel with 73.1mm centerbore.
Please see eBay's Vehicle Compatibility Table for a list of applicable vehicles
Important Notes
If you are not sure the hub size of your vehicle, please send us an eBay message and we will be glad to help Please Verify the measurement of your VEHICLE BORE AND WHEEL before purchasing eBay's Parts Compatibility Chart above should only be used as a guideline.
Legal Information
NOTE: This is an aftermarket component. The vehicle makes/models used in this listing are registered trademarks of their respective owners, and are used in this listing to identify compatibility.