|
![]() ![]() ![]() ![]() ![]() ![]() |
SPECIFICATIONS
Quantity | Two (2) Spacers |
Thickness Per Spacer | 3mm |
Centerbore | 57.1mm |
Bolt Pattern | 5x100 & 5x112 |
Material | T6 Aerospace Grade Aluminum |
FITMENT INFORMATION
Audi
1989-1991 200
2004-2024 A3
1996-2008 A4
1995-2011 A6
1997-2000 A8
2015-2023 Q3
2022-2023 Q4 e-tron
2022-2023 Q4 e-tron Sportback
2008-2016 R8
2017-2023 R8 (Front Only)
2017-2023 RS3
2007-2008 RS4
2003-2004 RS6
2015-2024 S3
1992-2008 S4
1995-2011 S6
1999-2011 S8
2008-2018 TT
2012-2014 TT RS
2009-2017 TT S
Volkswagen / VW
2019-2023 Arteon
2018-2023 Atlas
2020-2023 Atlas Cross Sport
2011-2019 Beetle
2009-2017 CC
2010-2020 Golf
2005-2023 Jetta
2006-2022 Passat
2021-2023 Taos
2009-2023 Tiguan
Toyota
1983-1991 Camry
1994-2005 Celica
2003-2024 Corolla
2003-2014 Matrix
2005-2021 Prius
Scion
2005-2010 Tc
2008-2014 XD
Pontiac
1984-1988 Fiero
1985-1998 Grand Am
Chrysler
2001-2010 PT Cruiser
2001-2006 Sebring
Dodge
1995-2005 Neon
1995-2006 Stratus |
Important Notes
As shown in the pictures... This listing is for SPACERS ONLY. No Lugs Included.
Extended Wheel Studs or Lug Bolts may be Required. Buyers are responsible for having these for proper installation.
Important Safety Advisory
As with any component you purchase for your vehicle, installation should be done by a qualified technician. We've provided the following information as a general reference for purchasing and installing these spacers/adapters. The following list isn't all-inclusive and may be different depending on the vehicle you drive, type of wheels you have, and ideal setup you're trying to achieve. Failure to install properly may cause your lug nuts/bolts/spacers to loosen or break while driving. If you are not confident or familiar with the installation, please ask a trained professional for help.
Before Purchasing
- Required that proper measurements are taken to ensure that by adding this spacer, the wheel/tire won't hit the fender or any other part of the vehicle.
Before Installation
Check compatibility of spacer-to-hub, spacer-to-wheel, and lugs (thread pitch, seat type, shank length)
During Installation
- Installation should be performed by a trained professional using proper tools.
- Avoid using an impact wrench or any pneumatic tools; improper usage may cause damage to components.
- Ensure proper thread engagement. Typically, its a minimum of 5-8 turns before the lug nuts/bolts tightens, however, it varies depending on thread pitch and type of vehicle.
- ALL Lug Nuts/Bolts MUST be torqued to manufacture specifications.
After Installation
- Test drive your vehicle to ensure the hardware is installed properly. Pay close attention for any noises, vibrations, or compatibility issues (such as fender rubbing).
- Inspect and re-torque ALL Lug Nuts/Bolts after 25-50 miles of driving
Note: No returns or exchanges once product has been installed on the vehicle.
Legal Information
Note: This is an aftermarket component. The trademarks used in this listing are registered trademarks of their respective owners, and are used only to identify the vehicles to which this part fits.
