-
Short-strand fiber glass putty used for bridging holes in steel and fiber glass panels.
-
Putty forms a hard durable surface, however its shortstrand formulation enables it to be easily applied and sanded.
-
Specially formulated for the professional it can be top coated with putty or directly top coated with paint.
-
3 Liter Can
-
Includes hardener
Surface Preparation
U-POL Fibral Lite putty can be used on the following
-
Steel - degrease and abrade with 80 grit paper.
-
Fully cured paint surfaces - degrease and sand with 180 grit paper.
-
Glass Fiber - degrease and sand with 80 grit paper.
Mixing Ratio
- 100% by weight U-POL
Fibral Lite 3% by weight U-POL hardener for putty. The exact mixing
ratio is not critical although over or under catalyzation may affect the
gel time.
Pot Life
- Rapid curing and non shrinking once mixed, 4-5 mins. at 70ºF with 3% hardener.
Drying Time
- Sandable after 20 mins. at 70ºF.
Application
- Smooth creamy putty it will not sag even on vertical surfaces.
Sanding
-
Begin sanding with 80
grit paper using finer grades to finish such as 120 then 220 grit, for
rotary sanding equipment a hard back plate is recommended.
-
Hand sanding can be done wet or dry.
- ABTM part number: 0578
This item can only ship by ground within the Continental US. Next Day or 2nd Day, AK & HI, & International delivery not available.
