3800A Dent Puller Machine Spot Welder Auto Car Body Dent Puller Repair Kit 110V

Slide Slide Slide Slide Slide Slide Slide Slide Slide Slide Slide Slide
$299.0
Brand
Unbranded
Phase Voltage:
110V 50-60/Hz
Rate Power:
1.8KVA
Product:
Dent Puller Machine
Input Current
: 16A
Work Model :
6 Modes Available
Power:
3KW
Power Level:
Spot Welding / pulse spot welding
Single Side Welding Thickness:
0.024 - 0.06 in / 0.6 - 1.5 mm
Maximum Current:
3800A
Dimensions (L x W x H):
7.56 x 11.81 x 7.16 in / 19.2 x 30 x 18.2 cm
Weight:
44 lbs / 20 kg
condition
New

3800A Dent Puller Machine Spot Welder Auto Car Body Dent Puller Repair Kit 110V
Description
Automotive intelligent pulse repair machine. The machine is the ideal product for dent pulling and straightening of low thickness car body elements, such as bonnet, door, roof panel and wings. Advanced Split design, anti-slip package plastic hammer, pure copper cable.
Specifications:
Phase Voltage: 110V 50-60/Hz
Rate Power: 1.8KVA
Input Current: 16A
Work Model : 6 Modes Available
Power: 3KW
Power Level: Spot Welding / pulse spot welding
Single Side Welding Thickness: 0.024 - 0.06 in / 0.6 - 1.5 mm
Maximum Current:3800A
Dimensions (L x W x H): 7.56 x 11.81 x 7.16 in / 19.2 x 30 x 18.2 cm
Weight: 44 lbs / 20 kg
Feature:
【Smaller Welding Spot & Stronger Welding】Spot welder dent puller uses intelligent induction for welding,compared with traditional machines,the welding joints are extremely small,the consumables loss is small, no damage to the anti-rust paint behind the sheet metal, less damage to the original bodywork and stronger welding.In addition, the repair machine supports both welding/puller functions and is widely used for sheet metal repair, dent forming, body damage or other metal deformation repair.
|【6 Welding Modes & Auto/Manual Welding】Spot welder dent puller adopts a new generation of microcomputer program control,which greatly improves the welding range and welding accuracy.6 welding modes are available,including Triangular meson pull,Round meson pull,OT meson pull,Wave line welding,Carbon rod to close the fire,Single-sided spot welding.Car dent puller has auto welding and manual welding two modes can be switched at any time, easy to operate.
|【Automatic Overheat Protection&Efficient Cooling】Spot dent puller has automatic overheating protection system.If the spot welder is overused,the high temperature warning indicator will come on and the machine may stop working for a few minutes.When the transformer is cooled,the machine will be used again.Built-in high-efficiency radiator can help the machine to dissipate heat quickly,prevent the machine from burning out,and ensure the machine to dissipate heat quickly while working efficiently.
|【Precise Adjustment&High Quality Pure Copper Welding Wire】The control panel of the machine is designed with a knob which can be adjusted to precisely adjust the welding current and can also be used to switch the welding mode.The input/output line of the dent repair puller are made of international pure copper welding wire,which is soft and not easy to break,not only generates little heat,but also saves energy and saves power.3800A super current output makes the welding more stable and reliable.
Content:
1* Spot Welder
1* Accessory box
1*Welding gun
1* Dent puller
1* Manual sucker
20*Round washer
1* Hex key
1* Dual-purpose meson head
10* Triangle straight pull sheet
2* Carbon rods
1 * Six-claw hook
1 * Round gasket chuck
1* Carbon rod connector
1*Draw hook
1*Connector
10*Wave line kit