[ IMPORTANT SAFETY WARNING ] Before purchasing, Check your current lug nut size (length/width/seat). These are NOT OEM SIZE, and therefore may not fit OEM wheels or wheels made by the manufacturer that require a wider lug seat. Wheel hardware is an important safety component. Failure to install correct hardware is unsafe and may cause wheel/tire assembly to loosen or fall off while vehicle is in motion.
[ FITMENT ] Compatible with 2000-2005 Ford Excursion Compatible with 1999-2016 Ford F-250 F250 Super Duty (Check Stud, could be 14x2 or 14x1.5, this only works on 14x2) Compatible with 1999-2016 Ford F-350 F350 Super Duty (Check Stud, could be 14x2 or 14x1.5, this only works on 14x2)
For select 8-Lug Trucks SUVs. Compatible with Ford 2000-2005 Excursion. Compatible with 1999-2016 F-250 F250 Super Duty (Check Stud, could be 14x2 or 14x1.5, this only works on 14x2). Compatible with 1999-2016 F-350 F350 Super Duty (Check Stud, could be 14x2 or 14x1.5, this only works on 14x2). Vehicle Must Have M14x2 14x2mm Studs. IMPORTANT: Check existing wheel lug hole before purchasing.
Total Length: 2.00 inches | Thread Size & Pitch: 14x2 | Seat Type: Cone Seat | Color: Black | HEX SIZE: Spline | STYLE: Long Spline, Closed End Lug Nuts. IMPORTANT: Ensure these lug nuts are the size (length/width/seat) that you need, see Diagram for Measurements.
IMPORTANT! CHECK BEFORE PURCHASE! Check your current nut size (length/width/seat). NOT compatible with ALL OEM WHEELS. Does NOT fit wheels with larger lug seats. May not fit OE wheels or wheels made by the manufacturer with wider lug seat, please verify measurements. SAFETY ADVISORY: Lug Nuts are an important safety component. Ensure they are the proper size. Failure to install correct hardware is unsafe and may cause wheel/tire assembly to loosen or fall off while vehicle is in motion.
INCLUDED: One Package contains a 32 Pack of Long Spline, Closed End Lug Nuts. These black Lug Nuts arrive in a small compact box that is portable for easy storage. You will need certain tools for lugnut installation, including floor jack and torque wrench. You'll also need a Spline Hex Socket Key Tool.
These 14x2 lug nuts are not an oem or genuine OE part, but are compatible with Ford vehicles. We are confident you'll find our lug nuts to be a comparable OEM replacement, at a significant cost savings. Our lug nuts are made with with strong cold forged steel. Heat treated to ensure dependable strength, durability and performance. Triple coating provides the ultimate in corrosion, rust and scratch resistance.
Quantity
Set of 32 Lug Nuts
Thread Size
14x2
Type
Long Spline, Closed End
Seat Type
Cone Seat
Nut Height
2.00 inches
Socket Key Hex
19mm (3/4") & 21mm (13/16")
Material
Steel (Heat Treated)
Color
Black
FITMENT INFORMATION
IMPORTANT SAFETY WARNING: Before purchasing, Check your current lug nut size (length/width/seat). These are NOT OEM SIZE, and may not fit OEM wheels or wheels made by the manufacturer that need a wider lug seat. Failure to install correct hardware is unsafe and may cause wheel/tire assembly to loosen or fall off while vehicle is in motion.
Wheel Stud Length WARNING: If your wheel studs are longer than 50mm (2 inches), these nuts will bottom out, potentially causing accident and/or injury.
Compatible With: Can fit on 8-Lug Vehicles that use 14x2 Thread Pitch studs
2000-2005 Ford Excursion
1999-2016 Ford F-250 F250 Super Duty (Check Stud, could be 14x2 or 14x1.5, this only works on 14x2)
1999-2016 Ford F-350 F350 Super Duty (Check Stud, could be 14x2 or 14x1.5, this only works on 14x2)
Important Notes
Before Purchasing Verify Thread Size - If your vehicle is not shown as compatible above, it is the buyer's responsibility to ensure they are purchasing the correct thread size. Verify Seat Type - Wheel Lug Holes have a variety of seat types. It's impossible for us to know what you have. Therefore, it is the buyer's responsibility to verify the seat of this nut matches their wheels Verify Lug Nut Measurements - We cannot know what wheel you own. It is necessary for you to check the diagram of the nut (width/length/etc) to ensure it will work with your wheels. Verify Wheel Lug Hole Diameter - The socket key that comes with these lug nuts are 25mm (1") in diameter. Your wheel lug hole diameter must be larger than that.
Installation Professional Installation Recommended Be sure to torque the lug nuts to the vehicle manufacturer specifications Avoid using an impact wrench; improper usage may cause damage to components Check and re-torque after 25-50 miles of driving
Legal Information
NOTE: This is an aftermarket component. The vehicle makes/models used in this listing are registered trademarks of their respective owners, and are used in this listing to identify compatibility.
Verify Thread Size - If your vehicle is not shown as compatible above, it is the buyer's responsibility to ensure they are purchasing the correct thread size.
