Material: PVC
Color: Blue
Current Output: 30A
Voltage: 12V/24V
Power Source: Solar
Size: 13.2CM x 7CM / 5.2'' x .8''
Product Features:
1. Build-in industrial micro controller.
2. Big LCD display screen, adjustable charge and discharge parameters, with power-off memory and other functions.
3. Fully 3-stage charge management.
4. Built-in short circuit protection, open circuit protection, reverse connection protection, overload protection.
5. Dual USB output, the maximum current is 2.5A, support Iphone charging.
6. Dual mosfet reverse current protection, low heat production.
Safety Instruction
1. make sure your battery has enough voltage for the controller to recognize the battery type before first installation.
2. The battery cable should be as short as possible to minimize loss.
3. The regulator is only suitable for lead acid batteries: OPEN, AGM,GEL. It is not suitable for nickle metal hydride, lithium ions or other batteries.
4. The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.
Characteristics:
1. Build-in industrial microcontroller.
2. One-key configuration, digital display, automatic memory function.
3. Fully pwm-load management load.
4. Build-in short circuit protection, open circuit protection, reverse protection, over load protection
5. Dual mosfet Reverse current protection, low heat productions.
1. Build-in industrial microcontroller.
2. One-key configuration, digital display, automatic memory function.
3. Fully pwm-load management load.
4. Build-in short circuit protection, open circuit protection, reverse protection, over load protection
5. Dual mosfet Reverse current protection, low heat productions.
Connection of the System:
1. Connect the battery to the charge controller plus and minus. 1 will be displayed, in case of detecting 12 V battery, 2 in case of detecting 24 V battery.
2. Connect the photovoltaic module to the plus and minus regulator.
3. Connect to the consumer for the charge controller plus and minus.the reverse order applies when uninstalling!
An incorrect sequence order can damage the controller!
1. Connect the battery to the charge controller plus and minus. 1 will be displayed, in case of detecting 12 V battery, 2 in case of detecting 24 V battery.
2. Connect the photovoltaic module to the plus and minus regulator.
3. Connect to the consumer for the charge controller plus and minus.the reverse order applies when uninstalling!
An incorrect sequence order can damage the controller!