30A 12V 24V DC Motor Forward/Reverse Control Board Low Level P0 30A 40A High Current Limit Switch Driver Module
About this item
- Voltage: Work voltage is DC 12V-24V. The current is 30A for the motor.
- Self-locking: The module can be self-locked and triggered to start and operate when in working mode.
- Signal Input: The low level is active, and the input is the negative terminal of the photocoupler. Anything below 2V is considered a signal.
- Forward & Reverse Control: K1 is the forward start button, K2 is the reverse start button. SW1 is the forward limit switch and SW2 is the reverse limit switch.
Product Description
It is a DC motor driver module 30A 12V 24V 300W 0-60s automatic delay forward reverse controller. It has 3 features: forward and reverse control,
work status self-locking function, and low level trigger signal input.
The function of the DC motor driver module
1.K1 is the forward start button, K2 is the reverse start button; SW1 is the forward limit switch and SW2 is the reverse limit switch;
2.Press K1, the motor starts forward transmission immediately, and stops after SW1 is closed;
3.Press K2 and the motor will start back transmission immediately until SW2 is closed and stopped.
The parameters of the DC motor driver module
1.Work voltage:DC 12V-24V
2.Module energy consumption: 0.6W(No load motor included), Quiescent 0.1W
3.Signal input: The low level is active, and the input is the negative terminal of the photocoupler. Anything below 2v is considered a signal
4.Response speed: K1 K2 is 20ms, SW1 SW2 is 50ms
5.Work Temperature: -25℃~85℃
6.Work Humidity: 5%~95%RH