3 Stage Spray paint code UG M7204A White Platinum Pearl for Ford Lincoln Mercury

$89.95
Primary Color
White
Brand
Mercury
Type
Multi-stage Paint
Manufacturer Color Name
White Platinum Pearl
Color
White
Manufacturer Part Number
LVB
Factory Color Code
M7204A / NYA / PN3KP / RJI / UG / UG-7204
Paint Type
Urethane Base Coat and clear set
Country/Region of Manufacture
United States
Paint Volume
12oz.
condition
New

paint code M7204A / NYA / PN3KP / RJI / UG / UG-7204

White Platinum Pearl

for Ford, Lincoln and Mercury 2001 - 2024

3 can Urethane set,

1 can Ground Basecoat White, 

1 can Mid-base coat pearl , 

and 1 can SprayMax 3680061 Glamor

2K Gloss clear coat

3 stage touch up paint Set

PLEASE message us with the paint code you want, include the year, make , model, and color name if you know.  

Expedited shipping is not available, Federal rule ground transported shipping only (slow-moving) . Depending on your location the shipping time may be longer than the shipping estimate in eBay

We do not Guarantee color match or Do we warranty paint matching issues due to paint fade, paint surface preparation, weather exposure, application or any other variable.

Directions for use:
Always start by washing the area that you are painting with liquid dish soap and water or wipe the area down with a wax and grease remover. You should then lightly scuff the area that you are painting with a gray scotch-brite pad, this will give the paint something to stick to. If using primer use a red scotch-brite pad before applying primer. After applying primer wait 1 hour (or until fully dried), and then sand with 600 grit sandpaper.

First test the spray can on something besides your car. Do this to get used to how the can sprays. Then spray the area that you are repairing with 2 to 3 coats of color (or until full coverage is achieved) waiting 10 minutes between coats. If you are using clear coat wait 45 minutes before starting to apply the clear coat. Apply 2 to 3 coats waiting 10 minutes between coats.

Flexible Bumpers
Our paints are extremely flexible and can used over metal or plastic. You will not need an additional flex additive for flexible bumpers.

Metallic and pearl colors should be blended before clear coat is applied to hide the repair area. Remember the prep work is critical. The better the surface to be painted the better the end job looks.