3/16" Hex Rotary Broach / Wobble Broach / Rotary Punch
3/16" Hexagon 8mm Shank Diameter Rotary / Wobble Broach
MADE IN USA
- .189" across flat dimension +/-.001
- Includes rake angle at face
- Made from PM T-15 High Speed Steel
- Fits most common rotary broach holder brands
- .315" Shank Diameter x 28mm Length
- Reaches .378" deep and can be sharpened
- Designed for blind holes and through holes
- FREE SHIPPING
Meets ASME B18.3-2003 standard for Hexagon Sockets
| Nominal Size | Across Flats (A) | Broaching Depth (B) | Shank Dia | OAL |
|---|---|---|---|---|
| 3/16" Hex | .189 | .378" | 8mm | 1.25" |
Polygon Solution’s 3/16″ Hex Rotary Broach cutting tools are designed for superior performance when machining aluminum, brass, and mild steel. Polygon recommends drilling the pilot hole 3% oversize for hexagon forms. Pilot holes should also include a chamfer and extra depth for chip accumulation. Expect reduced tool life when broaching tougher materials and tighter pilot holes.
PRE-DRILL SIZE
The Recommended Pilot Hole Diameter for a 3/16″ Hex is: .1494″
The Recommended Minimum 45° Chamfer for a 3/16″ Hex is: .219″
SPEEDS AND FEEDS
Start with minimum feed rate of .002-.003 IPR and 700-800 RPM.
SET-UP AND INSTRUCTIONS
Additional Instructions Can Be Found Here:
https://www.polygonsolutions.com/images/Rotary-Broach-Hole-Prep-Speeds-Feeds.pdf
ROTARY BROACH TOOL HOLDER
For use with Polygon Solutions' Rotary Broach Tool Holder:
Sold Separately on eBay here:
https://www.ebay.com/itm/122755771399