Important fitting information below - please read before making a purchase
IMPORTANT
Please see fitting information on the page below to ensure this product is suitable!
Important - The Brass thread repair insert MUST be sealed with thread lock
2x Brass thread repair inserts, mild steel bleed nipples & rubber nipple caps
Insert external threads = M10x1mm
(Requires an M9 Drill bit & Thread locking compound - Not supplied)
Insert internal threads / bleed nipple threads = M6x1mm
Suitable for most calipers, including -
Willwood, ATE, Akebono, Advics, Brembo, Bendix, Bosch, Girling, TRW and many more
Kit contents pictured
Frentech repair parts are manufactured to premium quality standards
For assistance, please contact us via ebay messages
Important fitting information
This thread repair insert is designed to replace damaged threads and the bleed nipple seat. To use this insert effectively, the bleed nipple hole must be drilled out to 9.0mm and an M10x1mm Metric thread cut into the new enlarged hole. The thread insert can then be installed and sealed with HIGH STRENGTH - PERMANENT thread locking compound*.
* There are no tools or thread locking compound included with this kit!