25.2 X 13.6in Horizontal Sliding RV Window Water Resistant Tinted RV Window
Feature:
1. HIGH HARDNESS CONSTRUCTION: Horizontal slide RV windows feature an anodized, high hardness, heavy duty aluminum alloy frame and tempered glass that is easy to maintain and erosion resistant. Tempered glass is stronger than regular glass and if impacted, the RV window will shatter into small, relatively harmless pieces.
2. WEATHERPROOF SEALS: Our RV windows are pre applied with weatherproof neoprene window seals to form a weatherproof seal, the slim design and 90 degree right angles keep the edges tight and reduce drag on the side of the RV window frame.
3. UV RESISTANT WITH SCREEN: Black RV windows with tinted glass block harmful UV rays and ensure that the sun doesn't heat up the interior of your RV. Exposed mesh screens on the windows will allow fresh air to flow freely and provide a barrier for debris intrusion.
4. WIDE APPLICATION: With 675 x 378mm outer frame size, 640 x 345mm mounting size, suitable for 7mm wall thickness. The window opens/closes with a horizontal push/pull mechanism, simply unlock and slide the window to the side to create light or ventilation when required. Widely used for storage compartments, living rooms, lounges or wherever a window is required.
5. EASY TO INSTALL: Comes with drain plug, retaining clip ring, matching screws and step by step installation instruction manual to help you install the window quickly, you can add it to anywhere you need to fill a hole or create light.
Specification:
Material: Aluminum Alloy + Tempered Glass + Rubber
Installation Hole Size: Approx. 640 x 345mm / 25.2 x 13.6in
Window Outer Dimension: Approx. 675 x 378mm / 26.6 x 14.9in
Applicable Thickness: Approx. 7mm / 0.3in
Application: This black RV window with tinted glass can block harmful UV rays and ensure the sun doesn't heat up the interiors of your RV. The exposed mesh screen on the window allows fresh air to flow freely, providing a barrier. Simply unlock and slide the window to the side to create light or ventilation when needed, suitable for storage compartments, living spaces, lounges, or any location requiring a window.
Fitment: Fit for RV Motorhome engineering vehicles and more
Installation Steps:
Step 1: Determine the position where the window will be installed, measure the dimensions and make proper markings
Step 2: Cut a square corner hole of 640x345mm at the installation location
Step 3: Place the window into the cut hole and secure with adhesive
Step 4: Install retainer ring at the back, clamp the gap between the retainer ring and the outer frame of the window tightly against the wall, and secure the retainer ring with screws
Step 5: Apply sealant to any gaps, and sand down any protrusions for a finished installation
Package List:
1 x 640 x 345mm RV Sliding Window
1 x Retainer Frame
4 x Drain Hole Plug
20 x Screws
1 x Installation Instruction Manual
Note:
1. Before purchasing, please carefully check the size and ensure it is the item you need.
: