24V 30A Forklift Battery Charger EPallet Jack Club Car Lead-Acid Battery Charger

$199.0
Brand
AUTOOL
Warranty
3 Year
Country/Region of Manufacture
China
Compatible Model
Golf cart, Forklift, Sightseeing Car, Floor Scrubber Etc.
Charging voltage
24V
Load loss
5W
Efficiency
85%
Enclosure rating
IP21S
No-load voltage
30V
Input rated voltage
110V±15%
Charging current
30A
Input frequency
50Hz/60Hz
Rated Input power
1.32KW
Forklift Part Type
Charger
Compatible Equipment Type
Forklift
Compatible Equipment Make
All types of lead-acid batteries
condition
New
24V 30A Forklift Battery Charger EPallet Jack Club Car Lead-Acid Battery Charger

AUTOOL EM160 forklift battery charger is an advanced fully-automatic smart charger that can charge 24V and 200AH-300AH lead-acid batteries. The whole process only requires to plug in the power supply, turn on the power switch and it will be charged automatically. There is no need for manual supervision throughout the whole process, and the power is automatically stopped when it is full-charged.It also has a variety of protection functions such as reverse polarity, over voltage, under voltage, over temperature, short circuit,which is safer to use.

Working Instructions

  1. Firstly connect the battery connector, then plug it into 110V or 220V power supply, turn on the power switch, and the machine will output current and voltage after self-checking for 3-4S. The digital display shows the current and voltage, the charging indicator light is on (red), and the charger may make a slight noise. When the battery is fully charged, the full indicator lights (green).
  2. The digital display shows that the voltage and current are zero, and the fan stops after a delay of 60-120S. When the charger is over-temperature and over-current, the fault light is on (yellow), and the digital display shows zero voltage and current.
  3. After charging is completed, turn off the power switch, then unplug the power supply plug, and finally unplug the battery connector.

1、Be sure to distinguish the "+" and "-" poles when using the charger machine, which is available for 24V, 200AH -300AH lead-acid batteries.

2、Ensure that all connections are made with the power cut off. The correct sequence is to first connect the battery connector, then connect into the 110V or 220V power plug, turn on the power switch, confirm that the ground wire is connected reliably and there is no looseness, and finally connect the power plug into the power supply.

3、Do not use the way of charging connection to start the engine, which is easy to burn out the meter and motor.

4、Avoid operating in strong sunlight or rain, and do not allow water or rain to seep into the machine.

5、Avoid working in dusty areas or environments containing corrosive gases.

Specifications

Input rated voltage 110V/220V±15%
Input frequency 50Hz/6OHz
Rated input power 1.32KW
Charging current 30A
Charging voltage 24V
No-load voltage 30V
Load loss 5W
Protection YES
Overload protection YES
Anti-reverse protection NO
Efficiency 85%
Power factor 0.76
Insulation class F
Enclosure rating IP21S
Weight (Kg) 3.1
Dimensions (inch) 13.2*5.9*3.5
 
PushAuction