Compatible with Ford: 2004-2014 F-150 F150 (6-Lug, all trims, Including Raptor), 2003-2014 Expedition (6-Lug). Compatible with Lincoln: 2003-2014 Navigator (6-Lug), 2006-2008 Mark LT (6-Lug). Vehicle Must Have M14x2 14x2mm Studs. IMPORTANT: Check existing wheel lug hole before purchasing.
Total Length: 2.00 inches | Thread Size & Pitch: 14x2 | Seat Type: Cone Seat | Color: Black | HEX SIZE: Spline | STYLE: Long Spline, Closed End Lug Nuts. IMPORTANT: Ensure these lug nuts are the size (length/width/seat) that you need, see Diagram for Measurements.
IMPORTANT! CHECK BEFORE PURCHASE! Check your current nut size (length/width/seat). NOT compatible with ALL OEM WHEELS. Does NOT fit wheels with larger lug seats. May not fit OE wheels or wheels made by the manufacturer with wider lug seat, please verify measurements. SAFETY ADVISORY: Lug Nuts are an important safety component. Ensure they are the proper size. Failure to install correct hardware is unsafe and may cause wheel/tire assembly to loosen or fall off while vehicle is in motion.
INCLUDED: One Package contains a 24 Pack of Long Spline, Closed End Lug Nuts. These black Lug Nuts arrive in a small compact box that is portable for easy storage. You will need certain tools for lugnut installation, including floor jack and torque wrench. You'll also need a Spline Hex Socket Key Tool.
These 14x2 lug nuts are not an oem or genuine OE part, but are compatible with various Ford or Lincoln vehicles. We are confident that you'll find our lug nuts to be a comparable, OEM quality lug nut, at a significant cost savings. If you need an OE Style Large Acorn Nut, please search for this item on Amazon: B087496WY1.

Quantity	Set of 24 Lug Nuts
Thread Size	14x2
Type	Long Spline, Closed End
Seat Type	Cone Seat
Nut Height	2.00 inches
Socket Key Hex	19mm (3/4") & 21mm (13/16")
Material	Steel (Heat Treated)
Color	Black

FITMENT INFORMATION

IMPORTANT SAFETY WARNING: Before purchasing, Check your current lug nut size (length/width/seat). These are NOT OEM SIZE, and therefore may not fit OEM wheels or wheels made by the manufacturer that require a wider lug seat. Wheel hardware is an important safety component. Failure to install correct hardware is unsafe and may cause wheel/tire assembly to loosen or fall off while vehicle is in motion.

Wheel Stud Length WARNING: If your wheel studs are longer than 50mm (2 inches), these nuts will bottom out, potentially causing accident and/or injury.

Fitment List
Compatible with many 6-Lug Vehicles that use M14x2 Thread Pitch studs, including:
2004-2014 Ford F-150 F150 (All Models, Including Raptor)
2003-2014 Ford Expedition
2003-2014 Lincoln Navigator
2006-2008 Lincoln Mark LT

Important Notes

Legal Disclaimer

Important Notes



	Before Purchasing
	

	 Verify Thread Size - If your vehicle is not shown as compatible above, it is the buyer's responsibility to ensure they are purchasing the correct thread size.

	 Verify Seat Type - Wheel Lug Holes have a variety of seat types. It's impossible for us to know what you have. Therefore, it is the buyer's responsibility to verify the seat of this nut matches their wheels

	 Verify Lug Nut Measurements - We cannot know what wheel you own. It is necessary for you to check the diagram of the nut (width/length/etc) to ensure it will work with your wheels.

	 Verify Wheel Lug Hole Diameter - The socket key that comes with these lug nuts are 25mm (1") in diameter.  Your wheel lug hole diameter must be larger than that.

	

	Installation
	

	 Professional Installation Recommended

	 Be sure to torque the lug nuts to the vehicle manufacturer specifications

	 Avoid using an impact wrench; improper usage may cause damage to components

	 Check and re-torque after 25-50 miles of driving

Legal Information



NOTE: This is an aftermarket component. The vehicle makes/models used in this listing are registered trademarks of their respective owners, and are used in this listing to identify compatibility.

More Items!