2300W Electric Pipe Threader Pipe Threading Machine 6 Dies 1/2-2" HD Pipe Cutter

Slide Slide Slide Slide Slide Slide Slide Slide Slide Slide Slide Slide Slide Slide Slide Slide Slide Slide Slide Slide Slide Slide
$272.0
Feature 1
Creative Design，Durable Material，Beautiful Appearance
Voltage
110 V, 50 Hz
Transportation does not include
canarias
Thread Size(s)
1/2, 3/4, 1, 1-1 / 4, 1-1 / 2, 2 (inches)
Model
Electric Pipe cutter
Brand
Unbranded
Insert electricity
20 ,9 -49,6mm 1/2 -2"
Tool Type
Pipe Threading Machine
Included Attachments
Pipe Die
Material
Whole copper wire
power
2300w
Product dimensions
57 x 14 x 31 cm
Nominal spindle speed
25 (r / min)
Thread Standard
/
condition
New

2300W Electric Pipe Threader Pipe Threading Machine 6 Dies 1/2-2" HD Pipe Cutter

2300W 50HZ 25 r / min Electric tapping machine Pipe cutter 1/2, 3/4, 1, 1-1 / 4, 1-1 / 2, 2 inch

 
Item condition: New: newer, unused
 
Threading range: 20.9 - 49.6mm 1/2 - 2 "
 
Material: all copper wire machine
 
Energy type: alternating current
 
Nominal power: 2300 (W)
 
Voltage: 110 V, 50 Hz
 
Weight: approx. 17.3 kg
 
Product dimensions: 57 x 14 x 31 cm
 
Nominal spindle speed: 25 (r / min)
 
Size: 1/2, 3/4, 1, 1-1 / 4, 1-1 / 2, 2 (inches)
 
Pipe outside diameter: 22,27,34,42,48,60mm
 
Inner pipe diameter: 15, 20, 25, 32, 40, 50 mm
 
Scope of application: Suitable for tapping galvanized pipes, iron pipes, PP pipes and pipes
 
Installation Instructions: Not included
 
 
Product function description:
 
Operator guidance:
 
1. Select the corresponding die head. The sheet is installed from the right on the host.
 
2. Clamps, clamps the pipe approximately the same length as the arm (L2 is approximately equal to L1).
 
3. Rotate the front and rear switches to the down arrow position to start the switch and auxiliary contacts.
 
4. With hard pipes such as stainless steel pipes, galvanized pipes, brass when refueling in good time, plastic pipes without fuel.
 
5. Note that the tube holder cannot be touched with the host during the right shift, otherwise it will injure the host.
 
6. After the machine stops, pull the reverse switch up and exit the pipe.
 
7. This product supports the use of standard pipes.
 
 
Description:
 
This is our brand new electric tube threading machine, which is widely used in plant installation and construction industry. It is suitable for threading various water, electrical or gas pipes from 20.9 mm to 49.6 mm. With its powerful motor, this threader is an ideal device for increasing work efficiency, shortening construction time, ensuring construction quality and reducing labor intensity.
 
This product is suitable for industrial and mining companies, institutions, family maintenance.
 
 
Characteristics:
 
* 100% new and high quality
 
* Adopt of high-quality die head, long life, thread clear
 
* Ease of use, convenient to carry and durable
 
* Lightweight and compact hand design, save labor
 
* Apply to the thread work of galvanized pipe and iron pipe
 
* Powerful motor, increase work efficiency, shorten the construction time
 
* Includes 6 screw nozzle heads: 1/2 ", 3/4", 1 ", 1-1 / 4", 1-1 / 2 "& 2"
 
* Note: Keep adding the lubricating oil as you use it
 
 
 
Package list:
 
1 x pipe thread
 
1 x pipe clamp
 
1 x fixed rod
 
2 x carbon brush
 
1 x oil can
 
6 times dies
 
1 x storage box
 
 
 
 
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Shipping:
 
2-9 working days to: USA
 
    •  
    • We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
 
  •  
Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
Feature 1Creative Design，Durable Material，Beautiful Appearance
Voltage110 V, 50 Hz
Transportation does not includecanarias
OE/OEM Part NumberDoes not apply
MPN ( MPN )n/a
UPCDoes not apply
Thread Size(s)1/2, 3/4, 1, 1-1 / 4, 1-1 / 2, 2 (inches)
ModelElectric Pipe cutter
BrandUnbranded
MPNDoes Not Apply
Insert electricity20 ,9 -49,6mm 1/2 -2"
Tool TypePipe Threading Machine
Included AttachmentsPipe Die
MaterialWhole copper wire
power2300w
Product dimensions57 x 14 x 31 cm
Nominal spindle speed25 (r / min)
Thread Standard/
PushAuction