22 inch Led Light Bar Spot Flood Combo +2x 4" 3-ROW LED Pods For Jeep Truck SUV

22inch 1200W Led Light Bar

Product Features：

• WIDE APPLICATION: Suitable for various OffRoad/Jeep/SUV/ATV/UTV/Truck/Boat with DC 9V-30V. The light bar will be perfectly to be used as off road lights, work lights, fog lights, driving lights etc. A good choice for travel, long-distance transportation and courtyard lighting.

• LIGHT UP YOUR ROAD: Features a straight-design BLACK diecast aluminum body with jaw-dropping dual-row 12,00000 Lumens pure white light, 22" Offroad LED Light Bar is an ideal choice for off-road use and will light up everything in front of you.

• SOLID CONSTRUCTION: The 1200W led work light bar comes with the mounting brackets for easy installation. With more than 50,000 hours of lifespan, it is MORE DURABLE than the competitors version. While the IP68 rating make it incredibly resistant to water and dust. 

• COMBO BEAM DESIGN: The combination of two 60-degree flood beam and one 30-degree spot beam makes it lighter and wider to give you an incredibly clear visibility in any terrains, which helps avoid potential hazards on the road ahead.

Product Specification：

• Type: 9D LED Light Bar

• LED Power: 1200W

• Lumen: Approx. 1200000LM 

• Operating Voltage:DC 9-35V

• Waterproof rate:IP 68

• Color Temperature: 6000k

• Working Temperature:-45 ~+85°C

• Material:Die-cast aluminum alloy housing

• Lens material:PC

• LED Rows:Dual Row

• Beam Type:Combo Beam

• Beam Angle:30 Degree Spot & 60 Degree Flood

• Working Life-Span:Over 50,000 hours

• Heat Dissipation Theory:All-in-one heat sink conduction

• Certificates:CE/RoHs/ IP68

4inch Led Light Bar

Specifications:

• LED chip: 20 high intensity LEDs

• LED power: 60W

• Luminous flux: about 6000lm

• Working voltage: 10-60v DC

• Waterproof grade: IP 68

• Light color: white

• Color temperature: White: 6000K

• Working temperature: - 45 ~ + 85 ° C

• Material: 6063 aluminum profile and plastic, aluminum bracket, PC lens

• Lens material: PC

• Beam: 20 degree point + 60 degree flood

• 50000 hours life

• Certification emission reduction t Description: CE / RoHS / protection level 68

Installation:

• Test the lamp to make sure it works. (the red line is positive and the black line is negative.)

• Install the hex nut on the bolt and twist the spring meson.

• Pass the bolt through the mounting hole into the spring meson, and then tighten the hexagon nut.

• Connect the power cord to the appropriate power connector.

• Make sure the lamp is installed smoothly, then turn on the power.

Application:

• Suitable for any vehicle, automobile, ATV, SUV, ute, mine, ship, jeep, SUV, trailer, motorcycle, bicycle, excavator, truck, tractor and other heavy equipment.

1 To 2lead wiring harness kit

This LED Light bar wiring harness is designed for one set of universal fitment 2" 3" 4" 5" 6" 7" LED work lights & LED Daytime Running lights , The light bar wiring kit include a water-resistant red rocker ON/OFF Switch Relays with Controller., in-line fuse & relay, positive/ negative battery terminal hookups, and two connectors to make for an easy plug and play install.

Description：

• Condition:Brand New

• Wiring loom:Up to max 300W,16AWG wire

• Wiring Loom:12V DC 40A rated wiring loom

• Switch Relay12V DC 40A switching relay

• Fuse:Blade fuse holder with 30A fuse

• Length:Up to 3 metres of wiring

• Switch:Press button on/off switch

• Terminal:Terminal ends on most wires

• Apply : For most bar lights / spot lights / driving lights / work lamps 

Feature：

• 1) New heavy duty wiring suitable for HID and Halogen lights and LED light bars

• 2) Up to 10ft of wiring, terminal ends on most wires

• 3) Wiring harness (2 lead),wire two lights at the same time

• 4) Blade Fuse for multiple safety protection

• 5) Professionally assembled wiring loom, suitable for driving lights

• 6) Most of the wire ends are terminated with spade/plug or ring fitting for quick fitment

• 7) The on/off switch is press button type with adhesive backing for easy mounting

• 8) DC12V 40A rated automotive relay, For use with all 12V Vehicles, automobiles,Boats and devices

Package Include:

• 1x 22 inch Led Light Bar

• 2x 4inch Led Light Bar
  

• Mounting Brackets

• 1x 1 To 2lead wiring harness kit

Note:

This wiring harness can hook with 1 led work light .We recommend professional installation,pls let professinal installer to wire the harness kit; If let the wire short circuit,the harness would melt and even caught a fire,We suggest that wrap all exposed wire with electrical tape to avoid a short circuit.