Compatible with Toyota. Compatible with Lexus. Compatible with Scion . Compatible with Mitsubishi. Vehicle Must Have M12x1.5 12x1.5mm Studs.
Total Length: 1.50 inches | Thread Size & Pitch: 12x1.5 | Seat Type: Mag Style | Color: Black | HEX SIZE: 21mm (13/16") | STYLE: OE/Factory Mag Style Lug Nuts. See Diagram for Measurements.
SAFETY ADVISORY: Wheel hardware is an important safety component. Ensure these lug nuts are the proper size before installing. Failure to install correct hardware is unsafe and may cause wheel/tire assembly to loosen or fall off while vehicle is in motion.
INCLUDED: One Package contains a 20 Pack of OE/Factory Mag Style Lug Nuts. These black Lug Nuts arrive in a small compact box that is portable for easy storage. You will need certain tools for lugnut installation, including floor jacks and torque wrench. You'll also need a 21mm (13/16") Hex Socket Key Tool.
These 12x1.5 lug nuts are not an oem or genuine OE part, but are compatible with various Toyota, Lexus, Scion, Mitsubishi vehicles. We are confident you'll find our lug nuts to be a comparable OEM replacement, at a significant cost savings. Our lug nuts are made with with strong cold forged steel. Heat treated to ensure dependable strength, durability and performance. Triple coating provides the ultimate in corrosion, rust and scratch resistance.

Quantity	Set of 20 Lug Nuts
Thread Size	12x1.5
Type	OE/Factory Mag Style
Seat Type	Mag Style
Nut Height	1.50 inches
Hex Size	21mm (13/16")
Material	Steel (Heat Treated)
Color	Black

FITMENT INFORMATION

These Lug Nuts can fit any vehicle with studs that 12x1.5 | 12mmx1.5 | M12x1.5 | 12x1.5mm | UNF RH Thread Size. Please refer to the Compatibility Table to verify year/make/model.

Wheel Stud Length WARNING: If your wheel studs are longer than 34mm (1.33 inches), these nuts will bottom out, potentially causing accident and/or injury.

Important Notes

Legal Disclaimer

Important Notes



	Before Purchasing
	

	 Verify Thread Size - If your vehicle is not shown as compatible above, it is the buyer's responsibility to ensure they are purchasing the correct thread size.

	 Verify Seat Type - Wheel Lug Holes have a variety of seat types. It's impossible for us to know what you have. Therefore, it is the buyer's responsibility to verify the seat of this nut matches their wheels

	 Verify Stud Length - If your wheel studs are longer than 34mm (1.33 inches), this lug nut will not fit

	 Verify Lug Nut Measurements - We cannot know what wheel you own. It is necessary for you to check the diagram of the nut (width/length/etc) to ensure it will work with your wheels.

	

	Installation
	

	 Professional Installation Recommended

	 Be sure to torque the lug nuts to the vehicle manufacturer specifications

	 Avoid using an impact wrench; improper usage may cause damage to components

	 Check and re-torque after 25-50 miles of driving

Legal Information



NOTE: This is an aftermarket component. The vehicle makes/models used in this listing are registered trademarks of their respective owners, and are used in this listing to identify compatibility.

More Items!