- Tools Needed: Grinder and Welder
- This is not an easy repair. The power seat assembly was not made to disassemble. You will have to grind on two spots to disassemble and then reweld for assembly.
This kit also comes with a new front thrust washer, a small bottle of grease, as well as detailed instructions with colored photos. You will reuse your rear thrust disc and other mounting hardware.
Typical symptoms of bad vertical gears are:
1. Motor runs but no seat movement. Usually the gears are stripped.
2. Motor clicks but no seat movement. A broken tooth binds up the gears, acting as a cog.
3. Seat moves slightly then stops. A broken tooth binds up the gears, acting as a cog.
1. Motor runs but no seat movement. Usually the gears are stripped.
2. Motor clicks but no seat movement. A broken tooth binds up the gears, acting as a cog.
3. Seat moves slightly then stops. A broken tooth binds up the gears, acting as a cog.
Refunds: Unit must not be damaged or altered.