2000W Heat Gun Hot Air Wind Blower Dual Temperature Power Heater Tool 4 Nozzles

- USA Warehouse - Free & Fast Shipping  -

- Our Store Has Been Operating Since 2010 -  

- Any Problem, Please Feel Free To Contact Us Via Ebay Message. -

Please don't directly shut down the power while the heat gun working in high temperature.

Please adjust the temperature back to the lowest, blow off the residual temperature then shut down. It can extend the service life.

#Hot Air Gun with LCD DISPLAY

Description:

【STRONG POWER DUAL HEATING CORE】: 2000W heat gun provides strong power quickly heat up to 1112℉(600℃) . Our hot air gun use dual heating core, which is twice the life of ordinary heating wire. Heat up faster and high-performance copper winding motor inside the hot air gun gives strong power to make your heating job efficient.

【VARIABLE TEMP CONTROL 】: Unlike other dual temperature heat guns, our heat guns provide variable temperature control. The black dial provides rheostat-type heating, the high / low switch on its handle provides air flow control. Temperature range from 60 ℃-600 ℃(140℉~1112℉).

【OVERLOAD PROTECTION】: The high quality stainless steel outlet of the heat gun has high temperature resistance. The anti-scald cover is made of flame-retardant material with high melting point and slow heat conduction. Our heat gun also possess overload protector to avoid damaging your heat gun and circuit in extreme high temperature environment.

【ERGONOMIC DESIGN】: Heat gun has a scientific ergonomic design handle can prevent repetitive strain injuries and other musculoskeletal disorders.

Features:

---2000W heat gun provides strong power quickly heat up to 1112℉(600℃) in seconds. Professional heat gun gives outstanding performance.

---Variable Temperature Control

---Two modes: I: 400℃, 250L/min; II: 600℃, 500L/min

---Designed with dual heating wire for rapid heating, the integrated overload protection function can block the heating element and prevent burning;

---The heat gun have LCD display that allows user to adjust temperature , precisely control the Tempe..

---Ideal use for shrinking heat shrink tube, shrinking wrap, heating PVC, electronics, cell phone repairs, vinyl wrap, removing paint or floor tiles,loosening rusted bolts, and other heating or thawing purpose etc.

1. Grille-type air outlet design, uniform and powerful air supply

2. Double heating wire, overload protection, fast heating, not afraid of overload

3. PP+GF30 king body shell, more heat insulation, anti-drop and anti-scratch

4. Two-speed wind speed adjustment switch and stepless temperature adjustment knob design, adjust the temperature according to your own needs

5.365 high-power pure copper motor, uniform and stable operation, longer service life

Four Nozzles：

Deflector nozzle directs a long, narrow heat pattern to the work surface;

Two concentrator nozzles direct a concentrated heat flow to the work surface;

Reflector nozzle disperses heat flow evenly around the whole work surface

Specifications:

Main material: metal+plastics

Voltage: AC110V, 50Hz

Power: 2000W

Lowest Temperature: 60℃-400°C(140℉-752°F)

Highest temperature :60°C-600℃(140°F-1112℉)

Air volume: 350L/min, 500L/min (adjustable)

Package include:

 1 x Heat Gun

 4 x Nozzles

 1 x User Manual

Precautions for safe operation

1. Please connect the power according to the voltage marked on the tool.

2. Be sure to hold the tool tightly at all times when using the tool at high places.

3. Do not place the tool until the tool has completely stopped.

Heat gun safety precautions

1. Do not use the heat gun as a hair dryer.

2. Do not point the hot air blower directly at people or animals.

3. Do not use it near flammable materials or flammable gases.

4. Do not block or cover the hot air inlet and outlet. two!

5. When the hot air is in use or just after use, do not touch the nozzle. The handle of the hot air gun must be protected.

Keep dry.

6. The heat gun should be completely cooled before it can be stored.

Maintenance and Repair

Do not use turpentine, paint mixture, gasoline or similar substances to clean up.

1. When you stop working, please lower the temperature slowly, blow out all the hot air in the air duct, and then turn it off.

Turn off the switch and turn the hot air cylinder vertically upside down on a flat work surface.

2. When storing the hot air duct, please confirm that the hot air duct is completely cooled.

3. Always remove the dirt accumulated at the inlet and outlet, and keep the inlet and outlet clean.

4. Check all extended insulated wires, if damaged, replace them immediately, do not use damaged insulated wires

cords, as it may cause injury from electric shock if touched.

5. All repairs must be done by an authorized service center or other qualified service organization to ensure safety.

integrity and reliability.

#Hot Air Gun without LCD DISPLAY

Product Features:
1. Dual Speed Switch - 2 Temperature settings 450℃ & 600℃ and 2 Air flow speed control [II: 500 L/min, I: 300 L/min] can satisfy all your requirements.
2. Strong Power – With 2000W heats up to maximum temperature 600℃/932°F quickly; Professional DC copper motor can provide more stable operation.
3. Easy to use - The 63in power cord supports a wider range of use, very convenient for you to move freely in large work area. In addition, the back support gives it stability when you’re putting it down on its back so it can be used hands free.
4. Safer Design - Professional built-in overload protection prevents electric heat gun from over-heat due to misuse and extends service life.
5. Free Accessories - 4 nozzle attachments meet different application needs. Great for shrink wrapping, epoxy resin, shrink tubing, crafts, cell phone repairs, vinyl wrap, paint removal, electronics repair, etc.
6. Ergonomic Design - This heat gun is a useful and versatile tool for every family, it has a ergonomic design handle can prevent repetitive strain injuries and other disorders when you use this heat gun.
Note: Do not shut down the machine immediately after working in high temperature. It is necessary to turn off the machine after blowing out the after heating at low temperature.
Product Description:
Color: Black
Size: 24 x 18cm/ 9.5 x 7.1in
Material: PC + Electronic Components
Rated Voltage: 110 50/60Hz
Air Flow: 300-500L/min
Output Power: 2000W
Temperature: 450- 600℃
Weight: 570g
Speed: 2 Speed  
Power Cable Length: 160cm/63in
Package List:
1 x Hot Air Gun
4 x Nozzles
1 x User Manual

#Mini Hot Air Gun without LCD DISPLAY

Feature:

Long cables are sufficient for production: 90cm/35.4in long cables. The inner liner of the hot air shrink gun is made of high-quality stainless steel, and the outer liner is made of ABS plastic. The design is simple, durable, and compact, with a size of 230 * 50mm/9. * 1.97in

Scope of application: The Heat gun has excellent performance and can be used to heat shrink film, press pollen, Rubber stamp, etc. Self support and desktop use with built-in stand

Voltage and cooling hole: Voltage 110V, nozzle temperature can reach 200 ° C in seconds. The exhaust outlet at the tail of the Heat gun can reduce the internal high temperature and extend the service life

DIY essential accessories: If you like DIY, this is a great accessory.

Kind reminder: The nozzle temperature can reach 200 ° C in seconds. Do not use it for more than 10 minutes at a time. Turn it off and then on to continue working

Portable Heat gun DIY process embossing, shrink packaging PVC, dry paint, clay, Rubber stamp, etc.

100% brand new high-quality ABS and PC plastic materials, equipped with a 100 degree rotating stainless steel bracket. It is very small, durable, and practical

Maintain a distance of 5-6cm from the workpiece and heat at a 45 degree angle until complete. It can not only increase its hardness, but also increase its brightness

There are heat dissipation ports on both sides to reduce internal temperature and extend service life

This compact Heat gun with excellent performance can be used to heat shrink film, embossing powder and Rubber stamp. It is the best choice to replace the Bread machine or oven. The polymer clay will become hard and bright after use

The temperature cannot be adjusted, but theoretically it can reach around 200 degrees Celsius within a few seconds. But the usage time should not exceed 10 minutes, as long as it is turned off and then turned on, it can work continuously

Specification:

Item Size:230 * 50mm/9. * 1.97in

Cable Size:90cm/35.4in

Voltage:110V

Material:High-quality ABS,PC Plastic

Package List:

1 x Heat Gun