20' 9" Telescoping Mast -TV WIFI HAM Antenna Push Up Pole -Easy Up EZ-TM-50-5

Slide
$190.0
Country/Region of Manufacture
United States
Custom Bundle
No
Modified Item
No
Non-Domestic Product
No
Country of Manufacture
United States
UPC
0636134500200
Compatible Brand
Channel Master, ROHN
Brand
Easy-Up
Type
Mast
Size
249 in
Color
Silver
Model
EZ TM-50-5
MPN
EZ TM-50-5
condition
New

EASY UP EZ TM-50-5 TELESCOPING MAST

*Ships via UPS / FedEx Ground*

Genuine Easy Up Product - Made in the USA

Perfect for mounting antennas for TV, Ham Radio, WIFI, Scanner, etc

Collapses to 5' for easy shipping and storage

Use in guyed or bracketed installations

20' 9" assembled height

Mast hardware included (guy rings, mast clamps, cotter pins)

5 Sections of heavy duty galvanized tubing

Features 5 guy rings that rotate

Features a heavy duty thumbscrew/collar system for setting height

Weighs 25 lbs

Shipping Length: 61" 

Mast Section Dimensions:

Bottom: 2-1/4" OD x 18 Gauge 

2nd Section: 2" OD x 18 Gauge 

3rd Section: 1-3/4" OD x 18 Gauge 

4th Section: 1-1/2" OD x 18 Gauge 

Top: 1-1/4" OD x 16 Gauge 

Masting is overlapped for added strength and stability.

NOTE: GUYS, GUY HARDWARE, ANCHORS, AND MOUNT ARE NOT INCLUDED. PROPER GUYING AND GROUNDING ARE CRUCIAL TO SURVIVAL OF YOUR INSTALLATION.  SEE OUR STORE FOR ACCESSORIES. 

***EASY UP PRODUCTS ARE PROUDLY MADE IN THE USA***


  • Contact with a power line can KILL you. Choose a safe installation site. 
  • Mast must be guyed approximately every 9' at the top of each piece of tubing with the distance from the base of the mast to the anchor equal to the height of the mast attachment point. 
  • Anchors should be spaced every 120" if three guy directions are used, or every 90" if four guy directions are used. 
  • The base and all anchors must be properly grounded.
  • Antenna load should not exceed 2 sq ft of surface area
  • Do not attempt installation or dismantling if there is any wind or on a wet day
  • Tie off mast with rope (non metal) to deflect away from power line if it should fall during installation or dismantling
  • Use adequate and skilled help in working with this product and have an experience supervisor
  • If you are in doubt as to the proper use or method of installation or dismantling, contact an experienced installer and your local electrical utility for assistance.