(2) ThorLabs KM05 - Kinematic Non-Anodized Mirror Mounts for Ø1/2" Optics, 8-32 Taps
Features:
- Double-Bored Mounting Cell with Nylon-Tipped Setscrew Secures Ø1/2" Optics at Least 0.07" (1.78 mm) Thick
- Design: KM05 Front-Loaded Mirror Mount
- Angular Range: ±4°
- Resolution: 13 mrad (0.75°) per Revolution via Two 3/16"-100 Adjusters
- Two 8-32 (M4) Threaded Mounting Holes Allow for Left- or Right-Handed Orientation
The KM05 kinematic mirror mount is compatible with Ø1/2" optics at least 0.07" (1.78 mm) thick. A nylon-tipped setscrew secures the mirror along the two lines of contact created by a double bore. The two 3/16"-100 actuators utilize a hex socket to minimize accidental movement in shared facilities, and they can be adjusted using our 5/64" hex key adjusters, Each mount can be attached to a Ø1/2" post or Ø1" post via one of two 8-32 (M4) threaded mounting holes for either a right- or left-handed adjuster orientation.
Front-Loaded Mount:
The standard KM05(/M) Kinematic Mirror Mount has a front-loaded mounting cell in which the distance from the front surface of the optic to the post-mounting hole depends on the thickness of the optic. The KM05(/M) mount puts the center of the mirror 0.58" (14.7 mm) above the post. We also offer the KCP05(/M) centering plate to position the front surface of a 6 mm thick mirror in a KM05 mount over the center of a post.
The ThorLabs kinematic mirror mounts are in excellent working condition.