2 Flute Downcut CNC Router Bit 1/4'' 1/8'' Dia. End Mill 1/4" Shank Spiral Plung

$13.76
Size
6.35*6.35*25*75L
Flute Type
Downcut
Brand
XCAN
Router Bit Material
Solid Carbide
Type
Router Bit
Shank Diameter
1/4''
Number of Flutes
2
Cutting Diameter
1/4'' 1/8''
Number of Bits
1
Cutting Height
12mm,25mm
condition
New
SPIRAL PLUNGE BIT – Make grooves and dado cuts in particleboard, plywood, and laminate with the spiral bit. The spiral-flute bits shearing action yields a clean accurate cut while the augering action clears chips from the cut.
FOR USE WITH – Spiral router bit can be used with handheld, table-mounted portable routers, and as CNC machine router bits.
CUT CLEAN – Use the down-cut router bit for woodworking. Leaves a smooth edge on the surface. Excellent router bit for cutting Wood, Laminate, Melamine, Melamine Particle Board, MDF, Veneered Plywood.
SOLID CARBIDE – Special solid carbide router bits made for long-lasting cutting edge performance and tool life. Our bits feature a nanocomposite coating with extreme nanohardness and heat resistance.
Down cut endmills shear in a downward direction causing the uppermost layer of the material to be pressed down against the material just below it. This motion leaves a perfectly clean top surface edge. A concentration of wood chips in the work path will occur. Hose away excess wood chips to prevent bit breakage.
 
Package Include:1 Pc Down Cut Router Bit

PushAuction