• Inverted Reversing Valve: Allows for faster heat transfer with gravity assist shifting and reduced joint stress for increased reliability
• PlusOne Expanded Valve Space: 3 in. – 4 in. – 5 in. service valve space—provides a minimum working area of 27-square inches for easier access
• PlusOne Triple Service Access: 15 in. wide, industry leading corner service access, two fastener, removable corner and individual louver panels—makes repairs easier and faster
• Designing for Sustainability with Low GWP: For 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems. This new requirement will result in a 78% lower GWP than previous-generation refrigerants — with only minimal changes to system installation. For us, this is another step toward our continued sustainability goal of reducing greenhouse gas emissions, while still delivering an exceptional level of energy efficient, dependable comfort
• PlusOne Refrigerant Detection System: An integrated one-box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24V thermostat application and system protection by automatically pausing outdoor unit operation — if excess refrigerant is detected
• Quiet Operation: Provided by a cabinet construction with 1.0 inch of foil faced insulation for quieter sound characteristics
• Aluminum Indoor Coil Design: Constructed of aluminum fins bonded to internally grooved aluminum tubing and are more corrosion resistant
• Versatile 4-Way Convertible Compact Design: Allow for upflow, downflow, horizontal left and horizontal right applications even in the smallest of spaces
• Rugged Steel, Compact Cabinet Construction: Designed for added strength and versatility
• Field Installed Auxiliary Heater Kits: Provide exact heat for indoor comfort and include circuit breakers which meet UL and cUL requirements for service disconnect
• Less than 2% Cabinet Air Leakage at 1-inch H2O: When tested in accordance with ASHRAE Standard 193
• Designing for Sustainability with Low GWP: For 2025, the Environmental Protection Agency (EPA) has set a global warming potential (GWP) limit of 700 for refrigerant used in heating and cooling systems. This new requirement will result in a 78% lower GWP than previous-generation refrigerants — with only minimal changes to system installation. For us, this is another step toward our continued sustainability goal of reducing greenhouse gas emissions, while still delivering an exceptional level of energy efficient, dependable comfort
• PlusOne Refrigerant Detection System: An integrated one-box, patented design featuring the A2L sensor and mitigation board, offering easier commissioning with a single component and simplified wiring configuration, compatibility with any 24V thermostat application and system protection by automatically pausing outdoor unit operation — if excess refrigerant is detected
CONTACT US
We are open Monday through Friday 8:00 A.M to 5:00 P.M.Southeast Region
6217 Anderson Rd
Tampa, FL 33634
Southwest Region
19407 Park Row, Suite 218
Houston, TX 77084
WHATS INCLUDED
- PRE-CHARGED CONDENSER
- 5, 8 OR 10 KW HEAT STRIP
- FACTORY INSTALLED COIL
- FACTORY INSTALLED DRAIN PAN
- WARRANTY PART REPLACEMENT SERVICE
- NEW IN FACTORY BOX
SHIPPING INFORMATION
SHIPPING IS INCLUDED FOR ANYWHERE IN THE LOWER 48 STATES.
RESIDENTIAL OR BUSINESS DELIVERIES WITHOUT A LOADING DOCK OR FORKLIFT WILL INCLUDE A LIFT GATE.
LIMITED ACCESS DELIVERIES (EX. PARKS, SCHOOLS, CHURCHES, FAIR GROUNDS, ARENAS, STADIUMS...) MAY REQUIRE ADDITIONAL FUNDS.
|
TERMS AND CONDITIONS
ORDERING
Please take all precautions when purchasing your equipment or supplies. We
offer advice to you based on your representation. We do not guarantee sizing or
application. We recommend that you get local advice and be sure prior to your
purchase. If you order the wrong equipment or supplies and your order has been
shipped and you have not unpacked or opened your order, we will refund 90% less
shipping costs.
CANCELLATIONS
If your order has been shipped and you have
not unpacked or opened your order, we will refund less shipping costs. If you have received your order and opened
it it can not be returned in original condition as shipped, we will refund
upon receipt and inspection an amount that is fair and equitable to both
parties.
SHIPPING
After payment we will ship your products with the following means. If the order
is over 100 pounds we will ship on a trucking line strapped to a pallet and
shrink wrapped for safety of your order. Please allow 7 to 10 days to arrive.
Items under 100 pounds will be sent UPS or Fed Ex please allow 5 days to
arrive.
It is our company and the trucking company’s policy to tell you to allow 7 to
10 days for delivery, but in most cases it will arrive sooner. In the unlikely event your shipment is late
contact our office.
If your shipment is going to a business address, a semi truck has to be able to
gain access to the business and it can not be in a residential area.
If your shipment is going to a residential address, it is vital that you are
present when shipment arrives. The Trucking Company will call you before
delivery.
Regardless which type of shipping, it is important that you open or
remove the box and inspect all equipment pieces you purchased. Budget
takes every precaution to package your items properly for shipment. It is
possible that small dents or dings to the cabinets could be found. In this
situation please note the damage on the trucking bill of lading and accept
the shipment. Minor flaws are cosmetic and do not effect the operation of the
system or warranty. In the event that major damage is evident, BE SURE to note
the damage on the trucking bill of lading and accept or reject the shipment.
IMPORTANT READ THE BELOW STATEMENT:
IF YOU OR SOMEONE ELSE ON YOUR BEHALF ACCEPTS THE DELIVERY WITH NO DAMAGE
NOTED, OR DO NOT INSPECT ALL EQUIPMENT, AND DAMAGE IS FOUND LATER YOU WILL NOT
BE ABLE TO MAKE A CLAIM. WE WILL NOT BE ABLE TO HELP YOU, WE WILL NOT SHIP YOU
ANOTHER UNIT OR GET INVOLVED WITH THE TRUCKING COMPANY.
INSTALLATION
We recommend and strongly encourage you to have the system installed by a
knowledgeable professional. Regardless of who installs your equipment it must
be charged and started by a licensed company or individual.
All installations must conform to local, state codes and EPA regulations
governing handling of refrigerant. Budget assumes no liability associated with
installation of your equipment.
RETURNS
We will always accept returns subject to cancellation policy. Budget will make
every effort to exchange equipment for another in an effort to minimize fees.
WARRANTY
All manufactures warranties apply based on brand and equipment. Budget offers
no labor warranty, as we are not installing your equipment. Your local
contractor should supply you a labor warranty. Your local company can also replace
any parts under warranty. Budget can handle the parts exchange for you if you
prefer, for a processing fee plus shipping charges.