2/4 Stroke 3.5hp 4hp 6hp 7hp Outboard Motor Fishing Boat Engine Water Cooled/Air Cooling Tiller Shaft
About Certification:
We Can Only Provide Ce Certification, There Is No Other Certification Can Be Provided,Thanks for Your Understanding.
Pay Attention
1.About the Noise: All the Gasoline Machines Are Noisy, Currently We Did Not Test the Decibel , but the Noise Is the Same As the Motorcycle, so It Is a Normal Phenomenon.
2.the Machine Itself Is Lightweight, It Can Use on Boat Weight of 100kg or less , Load-bearing 4 People, but the Speed Is Certainly Not the Same Whenone Person on It or 4 People on It . Customer Who Has High Expectations on Speed, Please Be Noticed.
3.It Can Be Marched with Inflatable Boats, Rubber Boats or Fishing Boats.
4.Necessary: You Have to Prepare a Boat-motor Stand or Hanging Board on Your Boat.
Sku：ot-028(3.5hp 2-Stroke)
There Are Two Pull Starter Included in the Parcel(One Is the Machine, Another One for Spare)We Don't Supply Wearing Parts (Pull Starter)for Free.
Strictly for Professional Use Only".
Two Strokes 3.5 Hp and 3.6 Hp Are Controlled by the Handle, Which Is Operated by the Clutch. There Is No Neutral, Only Idle Mode or Low Speed Mode.
Specification
Short Shaft:40cm
Overall Height:22cm
Transom Height:42cm
Full Throttle Perating Range:4000-5000r/Min
Maximum Output:3.5hp
Speed:10km/H
Type:2-Stroke
Ignition System:cdi System
Starting System:manual Start
Staring Carburetion System:choke Start]
Propeller Mark:7-1/45-a(Inch)
The Engine and the Propeller Ratio:2:1
Recommended Fuel:regular Unleaded Gasoline
Fuel to Oil Ratio: 35:1 （Please Be Suject to This Version, and Disregard the Manual About This Point）
Gear Ratio: 27/13
Maximum Speed: 10 Km / H
Built-in Fuel Tank: 1.3l
Fuel Consumption per Hour: 1.5l
When at Normal Cruising,the Appearence ofthe Senveth Picture. Falling Back the Boat, the Appearence of the Outboard Motor Likes theEighth Picture . Falling Back the Boat, You ShouldDrive Slowly Otherwise the Boat Will Not Stable. the Outboard Motor Backet Can Revolve 360. Only in
Simple Let the Engine Revolve 180 and the Operation Handle Face Back,the Boat Can Fall Back to Drive.
Announcements
After in the Sea Water or Turbid Water Cruising
1.Use the Fresh Water Cleaning the Outboard Motor
2.with the Moderate Velocity Circulating the Engine,Cool off the Water Chanel with Fresh Water.
3.Before Completely Running out Cooling Water,Don't Put the Outboard Motor Outside. Otherwise the Water Cam Pass the Exhaust Port to Enter the
Air Cylinder, from That Will Cause the Engine Breakdown.
4.the Engine Should Deposit in the Aridity and VentilatedWell Place,Avoid Exposing Directly in the Sunshine.
5.Before the Long Term Storing,You Should Run out of the Gasoline in the Fuel Tank.
Sku:ot-ml-132(3.6hp 2-Stroke)
Two Strokes 3.5 Hp and 3.6 Hp Are Controlled by the Handle, Which Is Operated by the Clutch. There Is No Neutral, Only Idle Mode or Low Speed Mode
Short Shaft:40cm
Strictly for Professional Use Only
1.Start-in-gear Protection/Clutch Feature Prohibits Prop Rotation While Idling.·
2.Lift/Tilt Feature for Shallow Water Operation and Convenience.
3.Features 360 Degree Steering Rotation for Reverse Without Gear Shifting.
4.Superior Engine Water Cooling System for Improved Engine Performance.
5.Easy Pull off Engine Cover with Push Button Latch for Instant Motor Access.
Product Description
Features: Features 360 Degree Steering Rotation for Reverse Without Gear Shifting .
Start-in-gear Protection/Clutch Feature Prohibits Prop Rotation While Idling .
Lift/Tilt Feature for Shallow Water Operation and Convenience . Superior Engine Water Cooling System for Improved Engine Performance . Easy Pull off Engine Cover with Push Button Latch for Instant Motor Access . Standard Cdi Ignition System for Easy Starting and Improved
Performance . Vertical Mount Engine Design for Increased Power, Performance and Durability . Superior Carbonation System with Primer Bulb for Increased Efficiency .
Twist Grip Throttle Handle and Engine Stop Button for Improved Response .
Superior Outboard Anti Corrosion System and Anodes for Increased Durability .
Durable Cast White Plastic Construction for Superior Corrosion Protection .
Through the Prop Exhaust Outlet for Decreased Noise and Pollutant .
Black Propeller or White Propeller Would Be Sent in Random
Shipping Weight:21.4 Pounds
Specification:
1)Max. Output: 3.6hp
2)Full Throttle Operating Range (Rpm): 4000-5000
3)Stroke: 2
4)Cylinder:1
5)Displacement (Ml): 55cc
6)Bore×Stroke (Mm): 44×33
7)Dimensions (L×W× H) Mm: 365×220x920
8)Transom Height:42cm
9)Starting System: Manual
10)Control System: Manual Tilt
11)Gear Shift Position: Clutch Control
12)Gear Ratio:2.08(27:13)
13)Propeller Options: 3-7¼ "X 5"
14) Recommended Fuel: # 93 Lead-free Gasoline
15)Recommended Gear Oil: Professional Gear Oil
16) Mixed Rating: Fuel : Oil (30/50:1)
17) Cold Style: Water-cooled
18)Engine Position:outboard
Sku：ot-ml-279(3.5hp 2-Stroke)
Two Strokes 3.5 Hp and 3.6 Hp Are Controlled by the Handle, Which Is Operated by the Clutch. There Is No Neutral, Only Idle Mode or Low Speed Mode
Please Notice:strictly for Professional Use Only
What You Will Receive Is Our New Version of This Boat Engine
The Trademark Will Be Yadao Instead of Speeda.
Short Shaft:40cm
Overall Length:83cm(32.68inch)
Overall Widteh:36.5cm
Overall Height:22cm
Transom Height:42cm
Full Throttle Perating Range:4000-5000r/Min
Maximum Output:3.5hp)
Speed:12km/H(Four People)
Type:2-Stroke
Ignition System:cdi System
Starting System:manual Start
Staring Carburetion System:choke Start]
Propeller Mark:7-1/45-a(Inch)
The Engine and the Propeller Ratio:2:1
Recommended Fuel:regular Unleaded Gasoline
Fuel to Oil Ratio: 35:1 （Please Be Suject to This Version, and Disregard the Manual About This Point）
Gear Ratio: 27/13
When at Normal Cruising,the Appearance ofthe Seventh Picture. Falling Back the Boat, the Appearance of the Outboard Motor Likes theEighth Picture . Falling Back the Boat, You ShouldDrive Slowly Otherwise the Boat Will Not Stable. theOutboard Motor Backet Can Revolve 360. Only in
Simple Let the Engine Revolve 180 and the Operation Handle Face Back,the Boat Can Fall Back to Drive.
Announcements
After in the Sea Water or Turbid Water Cruising
1.Use the Fresh Water Cleaning the Outboard Motor
2.with the Moderate Velocity Circulating the Engine,Cool off the Water Chanel with Fresh Water.
3.Before Completely Running out Cooling Water,Don't Put the Outboard Motor Outside. Otherwise the Water Cam Pass the Exhaust Port to Enter the
Air Cylinder, from That Will Cause the Engine Breakdown.
4.the Engine Should Deposit in the Aridity and VentilatedWell Place,Avoid Exposing Directly in the Sunshine.
5.Before the Long Term Storing,You Should Run out of the Gasoline in the Fuel Tank.
Sku:ot-ml-277(4hp 4-Stroke)
Strictly for Professional Use Only
Short Shaft:40cm
Type: 4 Stroke 4 Horsepower
Capacity: 52cc
Transmission Ratio: 2.08 (27:13)
The Number of Cylinders: 1
Maximum Speed: 4000-5000
Maximum Power: 4 Hp
Shift Position: Clutch Control
Package Volume: 95x40x30 Cm
Ignition System: Cdi
Cooling System: Air Cooling
Starting Method: Manual Start
Refueling: No. 93 Gasoline
Propeller Size: 7 1/4x7-a
The Maximum Fuel Consumption: 1.4 Liters / Hour
Recommended Lubricant:4 Stroke Lubricating Oil
Mixing Ratio:pure Gasoline
Trim and Tilt System:manual Tilt
Start-in-gear Protection/Clutch Feature Prohibits Prop Rotation While IdlingConvenience
Without Reverse Gear，Features 360 Degree Steering Rotation for Reverse Without Gear Shifting
Cooling System: Air Cooling
Easy Pull off Engine Cover with Push Button Latch for Instant Motor Access
Sku:ot-c001-073(6hp 2-Stroke)
Strictly for Professional Use Only".
Technical Parameters
Short Shaft:40cm