2/0-3 VNTC Tray Cable With Ground TC-ER THHN/PVC Power Control Wire Black 600V

Click Thumbnails to Enlarge

APPLICATION

• 2/0-3 with Ground VNTC Tray Cable Primarily used for power, control, signal, communication and lighting circuits in commercial and industrial environments. Suitable for installation in cable trays, supported by messenger wire in open air, raceways, channels, conduits and ducts. Approved for direct burial and outdoors in cable trays where sunlight resistant is required. Also may be installed in wet or dry locations or in areas exposed to chemicals and oils.

CONDUCTOR

• Fully Annealed Bare Copper Class B Compressed Strand per ASTM B-3 and ASTM B-8

INSULATION

• Flame retardant PVC/NYLON that is heat and moisture resistant per UL 62. Insulation meets requirements of Type THHN/THWN-2 as specified by UL 83.

GROUND

• Soft bare annealed copper per ASTM B-3, Class B stranding per ASTM B-8

ASSEMBLY

• Conductors are cabled together with or without fillers as required to form a round, compact cable core with a binder tape.

JACKET

• Flame and Sunlight Resistant Black PVC rated 90°C wet or dry per UL 1277

STANDARDS

• UL 62, UL 66, UL 83, UL 1277
• UL 1685 and IEEE 383 70,000 BTU Vertical Flame Test
• UL Listed to IEEE1202 and CSA FT4 70,000 BTU Flame Test
• UL Listed as TC-ER (Exposed Run) per UL Standard 1277 and used in accordance with NEC for 3 or more conductors
• Approved for Class 1 or 2, Division 2 industrial hazardous locations per NEC
• Rated 90°C wet or dry to meet UL 83 for THHN/THWN-2
• Meets cold bend test at -25°C
• ICEA S-95-658, ICEA S-73-532

PRODUCT SPECIFICATIONS

HAVE A LARGE ORDER OVER $5000? ASK US IF WE CAN DO BETTER ON THE PRICE.