1Pc Ignition Coil Pack for Ford Ecosport Fiesta Focus C-MAX 1.25 1.3 1.4 1.6 1.8

Fit for: 

FORD KA Hatchback (RB) ( 02.2001 - 11.2008 , 95 - 96 PS)

FORD Fiesta Mk5 Hatchback (JH1, JD1, JH3, JD3) ( 11.2001 - 06.2008 , 69 - 100 PS)

FORD Fusion Estate (JU2) ( 08.2002 - 12.2012 , 60 - 100 PS)

FORD Focus C-Max (DM2) ( 10.2003 - 03.2007 , 100 - 115 PS)

FORD Focus Mk2 Hatchback (DA_, HCP, DP) ( 07.2004 - 09.2012 , 80 - 115 PS)

FORD Focus Mk2 Estate (DA_, FFS, DS) ( 07.2004 - 09.2012 , 80 - 115 PS)

FORD Focus Mk2 Saloon (DB_, FCH, DH) ( 04.2005 - 09.2012 , 80 - 115 PS)

FORD Focus Mk2 Convertible (DB3) ( 10.2006 - 09.2010 , 100 PS)

FORD Mondeo Mk4 Saloon (BA7) ( 03.2007 - 01.2015 , 110 - 125 PS)

FORD Mondeo Mk4 Hatchback (BA7) ( 03.2007 - 01.2015 , 110 - 125 PS)

FORD Mondeo Mk4 Estate (BA7) ( 03.2007 - 01.2015 , 110 - 125 PS)

FORD C-Max (DM2) ( 02.2007 - 09.2010 , 100 - 116 PS)

FORD Fiesta Mk5 Van ( 05.2002 - 08.2008 , 60 - 80 PS)

FORD Fiesta Mk6 Hatchback (JA8, JR8) ( 06.2008 - ... , 60 - 134 PS)

FORD Fiesta Mk6 Van ( 10.2008 - ... , 82 - 97 PS)

FORD C-Max II (DXA/CB7, DXA/CEU) ( 12.2010 - ... , 105 - 182 PS)

VOLVO S40 II (MS, 544) ( 01.2005 - 12.2012 , 101 PS)

VOLVO V50 (MW, 545) ( 01.2005 - 12.2012 , 101 PS)

VOLVO C30 (533) ( 10.2006 - 12.2012 , 100 PS)

Specifications:

OE Numbers: 

1350562, 1459278, 1727629, 1754514, 1823596, 30731416, 30731419, 31216444, 31216444AA, 4M5G12029ZA, 4M5G12029ZB, C40118100A, CM5G12029FA, CM5G12029FB, CM5G12029FC

Product Material: Plastic

Number of Pins: 3 pin connector

Rated Voltage: 12 V

Colour: Black

CAUTION: Before starting the installation, please Disconnect the Negative Terminal of the Battery to prevent short-circuiting.

Packaging Weight: 904 g

Packaging Sizes (cm): 16 x 12 x 9

Features：

*Perfect Adaptability

Manufactured in accordance with the specifications of the adapted parts for a perfect fit.

*High Quality

Made of high quality material with voltage resistance, aging resistance, heat shock resistance, etc., it can withstand high temperature working environment for a long time.

*Safety & Durability

Using high conductive copper wire and high dielectric performance epoxy resin to ensure that there is no dead space in the potting, avoiding air bubbles, slits, etc. to cause voltage breakdown.

*Excellent Ignition Performance

This ignition coil is able to ignite successfully under different working conditions, featuring high ignition energy, long spark duration, and good low-temperature starting.

*Stable Performance

Uniform colour of the coil, no impurity black spot. It has even resistance value and good consistency, allowing it to work stably.

INSTALLATION NOTES

Before Installation:

1. Disconnect the power supply

Before starting the installation, make sure you have disconnected the negative terminal of the vehicle's battery to prevent unintended passage of current and avoid the risk of electric shock or short circuit.

2. Clean the installation location

Before installing a new ignition coil, clean the ignition coil holder and the area around it to ensure that there is no dust, oil or other contaminants that could affect the contact quality.

3. Check the spark plug

Check the condition of the spark plugs before installing a new ignition coil. If the spark plugs are worn or have reached their replacement cycle, it is recommended that they be replaced at the same time to ensure optimum performance of the ignition system.

When Installing:

4. Correct torque

When installing the ignition coil, it is important to use the correct torque to hold it in place. Over-tightening may damage the ignition coil or mount, while over-loosening may result in poor contact or looseness.

5. Connection check

Ensure that the electrical connections to the ignition coil are secure and not corroded. After installation, check that all connections are correct and that the ignition coil and associated cables have not been pulled or twisted.

6. Replacement one by one

If more than one ignition coil is being replaced, it is recommended that they be replaced one at a time to avoid confusing the ignition sequence or electrical connections.

After Installation:

7. Check for error codes

After installation, please start the engine and check whether any error codes appear. If any error lights come on or if any abnormalities are found in the ignition system, further inspection and diagnosis should be carried out immediately.

Packaging Type: 

Carton packaging 

Packaging Include: 

Ignition Coil * 1