1999-2015 Ford F250 F350 Rear Driveshaft Carrier Bearing and U Joint Kit Spicer

$83.27
Brand
Dana Spicer SVL
Other Part Number
HB88508AB CN2108661X
Type
Rear Driveshaft Driveline Carrier Bearing and U Jo
Interchange Part Number
S-B240 CB2108661X, HB88508A, drive-line driveline driveshaft drive-shaft
Warranty
6 Month 50,000 miles
Manufacturer Part Number
5-160X 211359X 15-160X 210866-1X
Mounting Hardware Included
Rear Driveshaft Driveline Carrier Bearing and U Jo
Drive Type
4WD
Superseded Part Number
5-160x 5-1410x 211359X 210866-1X
Country/Region of Manufacture
China
Placement on Vehicle
u joint u-joint U joint U-joint, Rear
condition
New

 

1999-2015 Ford F250 F350 4X4 Rear Driveline Carrier Bearing And U Joint Kit

Kit Includes

3 Each 1410 Spicer Select U-Joints (made in China)

1 Each Carrier Hanger Bearing Spicer SVL Line (made in China)

Used in truck with 7.3, 6.0. or 6.8 engines

CARRIER BEARING DUST SHIELDS MAY OR MAY NOT BE INCLUDED AND MAY NOT BE THE SAME SIZE AS THE SHIELDS ON YOUR DRIVE SHAFT.

1410 SERIES U-JOINT IS 1-3/16" CAP DIAMETER AND 4-3/16" ACROSS FROM CAP TO CAP

It is always good to check to make sure everything is standard and that nothing has been changed from the OEM parts.  According to the Spicer books I have these are the right U Joints for all of the applications listed in the listing.

 Spicer Select U-Joints Are Comparable To Moog Or Neapco. Spicer Has Come Out With This Aftermarket Line To Be Competitive With Aftermarket Prices

 

The SVL Difference - 6 Reasons to Choose SVL Products

1

Maximum Value

SVL™ brand products are the smart choice for older (post warranty) vehicles, and those used seasonally or in lower mileage and light duty situations. When genuine original equipment performance specifications are either not required or exceed your budget constraints, SVL products keep your vehicle rolling while protecting your bottom line.

2

Aftermarket Engineered

The SVL product line fulfills the aftermarket’s need for reliable performance, and is fully validated by Dana’s experienced engineering team.

3

Guaranteed Performance

SVL brand products have been designed and tested to deliver reliable performance and value. We have gone the extra mile to conduct quality and durability tests to ensure product performance. In addition, we provide a level of service that is unmatched.

4

Best in Category

The SVL brand products are engineer approved, performance tested, backed by Dana, stocked in the U.S. and value priced to meet your budget.

SVL is the best choice in the value brand category.

5

Availability

Why expose yourself to increased inventory costs and delivery risks? SVL brand products are stocked in the U.S.A. by Dana and are available for immediate shipment. Delivery lead times for competing imported products in this value brand category can be as much as 120-180 days and could require a large inventory investment.

6

Trusted Supplier – Backed by Dana Holding Corporation

SVL brand products are backed by Dana Holding Corporation – the largest independent drivetrain manufacturer in the world. As an extension of Dana’s current product offerings, SVL offers valuable driveline solutions that are affordable and delivered with the service and reliability our customers have come to expect.

Universal Joints

SVL brand u-joint are designed and tested to deliver reliable performance and value: SVL is the best choice in the category and keeps your vehicle rolling while protecting your bottom line. We offer 28 SKUs which covers 75% of the most popular u-joints for light duty and commercial vehicle applications.

In fact, during testing, the average performance of our SVL u-joints have consistently outperformed leading non-genuine brands. 


Value Driven Options to Fit Your Budget

SVL Products Warranty

Dana Holding Corporation warrants that SVL products sold hereunder will be free from defects in material and workmanship, conform to Dana’s drawings and specifications, and be fit for those applications approved in writing by Dana’s Engineering Department. Dana will warrant its products for six months or 50,000 miles (limited to the current owner).

This warranty does not apply to products or components that have been modified or altered; damaged by the environment or road conditions; collision, fire or other casualty; improperly or inadequately installed or maintained; or subjected to shock loading or driver abuse.

Dana makes no other representation or warranty with respect to the products, whether express or implied, as to merchantability, fitness for any particular purpose, or otherwise. Dana’s sole obligation hereunder is limited to repair or replacement of any defective product. Dana will not be liable for any incidental, consequential, special or other damages hereunder, including, but not limited to, expenses related to labor, towing, diagnostic costs, and loss of use of the vehicle.

No warranty claim will be allowed until Dana has had 90 days to examine the allegedly defective product. Required parts must be returned freight prepaid to Dana following Dana’s shipping instructions. Dana will be the final authority in the event cause of defect, cannot be mutually agreed upon.

If these are not the parts you are looking for check my e bay store or call me at the number below and I will do my best to find what you are looking for.  We have both new and used axle and drivetrain parts in stock, from the 60's to present.

Questions?  Feel free to ask us!  Just click on the link to e-mail us.  We usually respond within 24 hours. 


PAYMENT INFORMATION

We accept the following payment methods from U.S. buyers:

  • Pay Pal
  • Visa
  • Master Card
  • Discover

Credit card payments can be made directly through Pay Pal,

International buyers: 

  • Pay Pal with confirmed shipping address only

All payments must be received 10 days after purchase or auction end.  After 10 days a non-paying bid alert will be filed with eBay.
All non-paying bidders will be reported!


SHIPPING INFORMATION

We ship:

  • UPS
  • USPS
  • Various Carriers for truck freight shipments

We offer same-day shipping on most items we sell if order is paid for by 3:00 p.m. mountain standard time Monday through Friday.  Same-day shipping does not apply on holidays or when vacation settings are active.


BrandSpicer
Series1410

Bearing Id (In) A1.574
Cl To Mounting (In) B2.250
Bracket Width (In) C1.500
C-L To C-L (In) D6.620
Bolt Hole (In)0.560
VMRS024002008
Package TypeEACH
Package Qty1
Weight2.65 LB
Country of Origin

United States

active modal image
active modal image