The first thing I did was to get the rear lights working. One of the pictures shows them working. I used the original hose to run the wires from the tank to the switch on the missing cab. Several pictures show three wires now just sticking out of the hose section. You will likely have to add more wire to these wires. I got the rear lights to work by hooking up the red and green wires to a direct low voltage DC power source. Without a switch there was no reason to install a battery.. While working on the lights I had to install a reproduction battery door. I also added a tank plug and the hose that extends from the bottom to the top of the tank. Finally I replaced a couple of the decals.
Check my feedback and then buy with confidence.