Cooling System Pressure Tester Radiator Pressure Tester Kit: Constructed of high quality metal, aluminium, rubber, plastic for long lasting use.
Specifications
| Package List | 1 x Pressure testing pump with gauge |
| Package List | 1 x Thermometer |
| Package List | 3 x Chromed steel cap adapters |
| Package List | 10 x Anodized cap adapters |
| Package List | 2 x Connector |
| Package List | 1 x Adapter handle |
| Package List | 1 x Storage case |
| Caution 1 | Only used for detecting the cooling system leaks, do not do the other purposes |
| Caution 2 | Make sure the water tank is cooling off before opening the water tank |
| Caution 3 | If any damaged, do not use |
| Caution 4 | Do not wear watches, jewelries or loose clothes when using |
| Caution 5 | Process at places with good ventilation |
| Caution 6 | No smoking during operation |
| Caution 7 | Do not put the accessories on the engine |
How to Use
1. Open the radiator cap. Before open it, make sure it’s cooling state.
2. Choose applicable cap adaptor for vehicle.
3. Fasten the radiator opening meanwhile check if the gasket is applicable.
4. Insert the joint into adaptor.
5. Take out the hand held pump, pressurize to about 15PSI-20PSI.
6. Check pressure gauge:
(1) If the gauge pointer maintain in several minutes, the system is normal to work;
(2) if the pointer drops, the system has crack due to pressure damage, you should maintain it and make sure the system can still work after the maintenance.
7. After the check, release pressure from decompression valve till the gauge return to zero.
8. Before you collecting tools: (1) Insert the adaptor into joint, pressurize a few times, expel residual water and air in the hand held pump, then you can collect; (2) Inject gas into the tail air inlet of the hand held pump, lubricate the piston of the tube. Then insert adaptor into joint, pressurize a few times, expel residual gas in the hand held pump, then collect the tools.