FEATURES
- Probing at the OBDII connector is no longer required.
- Easily access each of the 16 pins while the scan tool communicates with the vehicle.
- LEDs to quickly indicate power or ground problems of OBDII connector.
- Mimics the OBDII connector layout for quick reference.
- Quick, safe, and convenient access to chassis ground and power by this monitor.
- Uses safety banana sockets that accept all types of 4mm banana plugs including those with safety sheaths.
LED INDICATIONS
Yellow LED (Pin 2/6/7/10/14/15)
Light up to show communication with the scan tool and protocol identification.
Green LED (Pin 4/5)
Light up to show ground is good.
Red LED (Pin16)
Light up to show there is power.
Package Include:
1 x Auto OBD2 Break Out Box
CAUTIONS I DISCLAIMERS
-This tool is designed for use by automotive professionals.
-This tool provides easy access to the vehicle data bus lines.
-Improper use of this tool can result in damage to the vehicle data communication system and associated circuits and systems.
-Do not jumper pins together without understanding the circuits.
-Do not use the tool to power up a load device exceeding 1 amp.
-Do not place a jumper between the power pin 16 and ground pins 4, 5. When this monitor is engaged the yellow L EDs will flash when changes take place on the corresponding data line. The flashing L EDs will allow you to determine the activity on that line. The green and red LEDs corresponding to OBDII connector pin4,5 and 16 are always active.