Here at MadMopeds we only supply parts that we use on our own bikes and our customers bikes in our workshop so you can be assured of them being of good quality.
These impossible to find brand new top quality fuel tap filters are for the following fuel taps....
* Honda NT650V, VT600
* CBR400
* CBR600
* CBR600F F3 (See pictures)
* CBR900RR Fireblade
* CBR250 RR
It may also fit other taps too.
If you are resealing and rebuilding your original fuel tap then you should also replace these too 😊
They are the best available and fit tightly inside the casting body of the tap.
We have done our homework on these and they will not be too big or need to be glued on or in 😅
These ones are a good tight fit inside the body or casting of the tap.
NOTE.... This filter is 18cm or 180mm long and your original may be longer at 210mm long.
PLEASE DO NOT BUY THIS UNLESS YOU HAVE CHECKED YOUR TAP AND THAT YOU CAN USE THIS FILTER..
Some OEM part numbers are.. 16952MAS003
16950MW0670 Fuel Tap
If you have a shorter filter than ours then we have shorter ones in stock or sometimes a longer filter can be used effectively but can touch the side of the tank.
We can also supply you with a brand new replacement fuel tap if that's what's needed.
We also stock the best quality heavy wall thickness fuel pipe and stainless steel clips to suit your OEM or new tap. Our pipe is E5 and E10 petrol resistant so please see our other listings if you need some.
Dispatched using 2nd Class large letter postage. If you need it quickly please select the 1st class postage option for only £1 extra. It's so much faster!
MadMopeds UK