Anaconda Rust Converter is a water based black coating which neutralises rust and absorbs it into the finished coating. Rust Convertor provides a self priming satin finish, often not requiring a top coat, although it can be painted with many types of paint if required.

Rust Convertor has exceptional weather resistance and gives along lasting protection against rust. It also has a high heat resistance (around 260°C), quick drying and low odour.

Rust Convertor can be used internally and externally on vehicles, metal fences and gates, guttering and downpipes, garden furniture, chimineas, and anywhere a tough, flexible, weather and rust resistant surface is required, all in one application.

Clean as much of the rust off first with a wire brush or other mechanical means, then paint Rust Convertor onto the prepared surface and work well in. Rust Convertor then chemically reacts with any remaining rust and forms an inert film.

Rust convertor comes with a brush in cap for ease of application. Long life span, can be over painted with most types of paint if required.

125ml Rust converter 3 in 1 primer, inhibitor, paint. (Anaconda Adhesives)