12000W LF PSW Solar Power Inverter
Split Phase Pure Sine Wave Solar Power Inverter
DC 48V to AC 110V & 220V
AC 110V: 6000W continue power, 24000w peak power
AC 220V: 6000W continue power, 24000w peak power
AC 110V & 220V at the same time: 6000W continue power, 24000w peak power
With 110v & 220v output LCD Display
With 110V Battery Charger
With UPS & Power Save on
For L1,N,L2 AC output
L1+N=110V (L1 is Live,N is Neutral) (110V Output Preferred Interface)
L2+N=110V(L2 is Live,N is Neutral)
L1+L2=220V(L1 is 220v Live,L2 is 220v Live)
Attention: The control board design of our power inverter is preferred for controlling the output voltage and current of 110V Output
So it is recommended to use a balanced output of 110V and 220V at the same time, such as
half 110V output + half 220V output,
or use 110V output more than 220V output.
If only the 220v output is used alone without use the 110 output, you can still get full 220v output,but the LCD display just show half data of the 220v output wattage & current
If you need 220v preferred control board and the LCD display show full 220v output wattage & current, you need to contact us to customize the control board as the link by your charger, and the battery charging function can only select 220V also,thanks
https://www.ebay.com/itm/315766910043
What's the different between High Frequency and Low Frequency?
HF power inverter have limit for runing appliances with motors ,engines,special light and TV
LF power inverter available for sensitive load,accept generator’s energy output,high power factor,and follow our warning label ,it would not have any problems.
Feature:
Ideally suitable for Journeys, Camping, Tents, Boat Trip, Working on the way and everywhere, where is no electricity!
Simply connect our with Battery.
For example as in a Car, Motorcycle, Camper or Boat and use electrical appliances.
UPS：
If the machine is connected to the battery and home mains at the same time, the machine priority to use the home mains electricity, if the home mains electricity is failure, the machine will be automatically converted into Inverter function to run the home appliances.
POWER SAVE ON:
If you only connect battery with load, ac cable unconnect, when you switch to battery charger mode, this means is power save mode on, in this moment the condition as follows: The inverter will go to sleeping mode , no load current is 0 AMP, every 3secs, the inverter will detection itself, after the 3sec, amp will go to 3amp(stand by power, time: 1sec, then back to sleep mode, amp is 0), the inverter will repeat the situation, until you switch to power save off(inverter on, down side)
some customer need use refrigerator ，can switch to power save on mode, as refrigerator only will work every half an hour or one hour , but inverter stay in power save function, no load current is 0amp , can save power.
True Copper Inductance
High quality true copper inductance with large size, better peformance of wave form filter.ensure the true pure sine wave AC output
Imported High Quality Capacitor
Use the high quality imported capacitor, large electric capacity, better performance, longer life time.
Ture Copper Transformer
As the core components, the transformer is customized according to the inverter performance, ensure the stable and sufficient and full AC output.
Interference Preventing Module
with this module, the interference will be very low. better to run the TV, radio, Audio.
High quality Mosfet
High quality true copper inductance with large size.better peformance of waveform filter ensure the true pure sine wave AC output
Ture Pure Sine Wave wave form
The wave form is very clean as the photo shown. if the test is not as it is, it will not leave the factory.Every Pure Sine Wave Power Inverter will be fully tested before sending out.
Possible Uses:
Equipment:
Computer, Latop, Monitors, Fax Devices, Scanner
Entertainment Electronics:
TV, DVD-Player, Play Consoles, Hi-Fi-Systems, Music Instruments, Satellite Decoder
Household Appliances:
100w Fans, Electric Shaver, etc...
Kitchen Devices:
Toaster etc...
Electrical Tools:
Drill, etc...
Because some appliances have instant power or motor, when use our power inverter must pay a attention for some points as follow:
1. If you need the power inverter to run the resistive loads (like TV, electric cooker, LEDight), please choose the inverter with continuous power higher than the appliance's rated power.
2. If you need the pure sine wave inverter to run the inductive loads (for appliance such as drill, saw,compressor, motor, water pump), please calculate the rated power of inverter 3 to 7 times higher than the rated power of your appliance. You would better ask the seller for advice if you are not sure.If you will power the battery charger on the inverter output side, please contact us for EMl filter to ensure the inverter performance.
3. It is better to use pure sine wave power inverter to connect with the TV, not modified power inverter.
4. It is better not use our power inverter connect with the fluorescent (lamp). There are two kinds of fluorescent, one is inductance type: when turnon switch, the light can on after one second or more and some also with buzz, this light has instant high voltage and it is more than 700v and even more than 1000v; another one is electronic type, it also has instant current and can be more than 700 Ah.
It only can use our power inverter to run the bulk.