- Performance Engine Support Bar: Holding capacity: 1100 lbs. This engine support bar can precisely position and support the engine while working on the transmission or holds the transmission in place while removing the engine for rebuilding.
- Rotating Lift Pile: The lifting height of 2 rotating hoists on the engine holder bar can be adjusted from 0 to 7.87 inches. Turn the handle to raise or lower the motor at the proper height according to your requirements.
- Engine Binding Chain: It comes with double strong iron chains that ensure the secure landing of the motor. The bold chains are tightly welded and don't break.
- Adjustable Working Range: Equipped with a knob and stable triangular base on each side. The range between the 2 bases can be adjusted; you can place them in the appropriate position. The width of the beam is 59.06 in, so it applies to vehicles that width is less than 59.06 in.
- Dual Steel Bar: The engine support bar is made of heavy-duty steel with a protective powder coat finish, high rigidity, and resistance. The dual steel bar build means this engine bar can support your engine or transmission through long rebuilds.
Key Features
-
Engine Support Bar
This engine lift bar can carry up to 1100lbs. It can precisely position and supports the engine, making repair and clean easier.
-
Two Rotating Hoists
The engine can be easily lifted by rotating the handle. You can raise or lower the motor at the proper height according to your requirements.
-
Heavy-duty Chain
The two fixed chains can lift and support the motor well. The height of the chain can also be adjusted precisely. The lifting height can reach 7.87 inches.
-
Horizontal Movement
The position of support feet is easier to adjust to fit most automobiles. The width of cars within 59.06’’ can use this motor transverse support bar to do engine repair.
-
Steel Construction
This engine holder bar is made of premium steel with powder coated surface for excellent durability and reliability. It works great for the holding of the engine and can withstand frequent use.
-
Great Compatibility
Adjustable height within 7.87'' and tunable width within 59.06'' make it suitable for various vehicles. Good for engine and transmission repairs on nearly any passenger vehicle.
The engine support crossbar is made of high-quality iron material with powder-coated finishing for excellent durability and reliability. Two iron chains with handles are conveniently and firmly used for repairing and placing the motor. The maximum load-bearing capacity is 1100 pounds, which can ensure the wide application of most cars.
- 1100Lbs Load Capacity
- Height Adjustable
- Two Triangle Supports
- Sturdy & Durable
Specifications
- Model: VV-FDJZCG-1100
- Capacity: 1100 lbs / 500 kg
- Adjustable Height: 0- 8.07 in. / 0-205 mm
- Chain: 3.57 in. / 90 mm
- Working Range: 28.74 - 58.28 in. / 730-1480 mm
- Material: Steel
Package Content
- 1 x Engine Support Bar
- 2 x Chain
Features & Details
- Performance Engine Support Bar: Holding capacity: 1100 lbs. This engine support bar can precisely position and support the engine while working on the transmission or holds the transmission in place while removing the engine for rebuilding.
- Rotating Lift Pile: The lifting height of 2 rotating hoists on the engine holder bar can be adjusted from 0 to 7.87 inches. Turn the handle to raise or lower the motor at the proper height according to your requirements.
- Engine Binding Chain: It comes with double strong iron chains that ensure the secure landing of the motor. The bold chains are tightly welded and don't break.
- Adjustable Working Range: Equipped with a knob and stable triangular base on each side. The range between the 2 bases can be adjusted; you can place them in the appropriate position. The width of the beam is 59.06 in, so it applies to vehicles that width is less than 59.06 in.
- Dual Steel Bar: The engine support bar is made of heavy-duty steel with a protective powder coat finish, high rigidity, and resistance. The dual steel bar build means this engine bar can support your engine or transmission through long rebuilds.
Key Features
-
Engine Support Bar
This engine lift bar can carry up to 1100lbs. It can precisely position and supports the engine, making repair and clean easier.
-
Two Rotating Hoists
The engine can be easily lifted by rotating the handle. You can raise or lower the motor at the proper height according to your requirements.
-
Heavy-duty Chain
The two fixed chains can lift and support the motor well. The height of the chain can also be adjusted precisely. The lifting height can reach 7.87 inches.
-
Horizontal Movement
The position of support feet is easier to adjust to fit most automobiles. The width of cars within 59.06’’ can use this motor transverse support bar to do engine repair.
-
Steel Construction
This engine holder bar is made of premium steel with powder coated surface for excellent durability and reliability. It works great for the holding of the engine and can withstand frequent use.
-
Great Compatibility
Adjustable height within 7.87'' and tunable width within 59.06'' make it suitable for various vehicles. Good for engine and transmission repairs on nearly any passenger vehicle.
The engine support crossbar is made of high-quality iron material with powder-coated finishing for excellent durability and reliability. Two iron chains with handles are conveniently and firmly used for repairing and placing the motor. The maximum load-bearing capacity is 1100 pounds, which can ensure the wide application of most cars.
- 1100Lbs Load Capacity
- Height Adjustable
- Two Triangle Supports
- Sturdy & Durable
Specifications
- Model: VV-FDJZCG-1100
- Capacity: 1100 lbs / 500 kg
- Adjustable Height: 0- 8.07 in. / 0-205 mm
- Chain: 3.57 in. / 90 mm
- Working Range: 28.74 - 58.28 in. / 730-1480 mm
- Material: Steel
Package Content
- 1 x Engine Support Bar
- 2 x Chain