Fume Extractor, Smoke Purifier for Soldering, Strong Smoke Absorber Filtration
Description
Don't let work ruin your health anymore! During the soldering process, a large amount of harmful fume will be generated. Our fume extractor can quickly inhale and filter the harmful gases, particles, dust, and other substances generated during your work, preventing your health from being threatened after inhalation and making your work environment healthier.
Key Features
High-quality Material: The POM plastic steel has good resistance to deformation or corrosion, allowing you to use it for a long time.
Health-Guard: Its filtration system consists of a cotton outer filter, central HEPA filter, and inner activated carbon filter, which can adsorb visible particles, 99.99% invisible particles, and harmful gases, allowing you to work with peace of mind without worrying about the harm of harmful gases.
Efficient Purification: The suction of the product can be adjusted infinitely within the range of 0-7945.8ft³/h. The special foam on the cover can enhance the sealing of the product and achieve efficient air purification.
Flexible Use: The 31.5-inch extraction tube can be bent or tilted at any angle, allowing you to absorb harmful gases from different directions, making it more flexible to use.
Easy to Use: The simple structure, detailed manual, and convenient air volume control knob allow you to quickly master this machine and start to use it.
Quiet Use: Its operating noise is less than 45dB, equivalent to ordinary indoor conversations, which will not cause too much noise, allowing you to have a quieter operating environment.
Safety Protection: This product is equipped with a filter clogging alarm function, which can prompt you to replace the filter promptly when the filter is clogged.
Easy Clean-Up: The smooth surface and simple structure allow you to easily remove dust and residues with a wet towel.
Compact and Portable: Its compact size (11.42*9.65*12.8 inches) only takes up a little space, making it suitable for small workbenches, and home DIY, and can be stuffed under the table while avoiding clutter in your work environment and hindering your work. The recessed handles at two sides ensure convenient holding/carrying of this machine.
Details
Non-slip Feet: The four non-slip rubber feet ensure higher stability, avoid scratching the floor, and raise the bottom for better ventilation.
Sturdy Buckle: It can fully seal the fume extractor during operation to avoid leakage and allow you to simply open the lid to replace the filter.
Silicone Smoking Hood: It has good high-temperature resistance and can adapt to industrial soldering.
Application
This product is suitable for soldering, soldering iron, and laser beauty fields, and is used to filter substances such as smoke, dust, particles, rosin, hair, and pollutants.
How to Change the Filter
1. Open the buckle and remove the cover.
2. Take out the three used filter elements and replace them with a new set.
3. Close the lid, fasten the buckle, connect the power, and start using it.
Suggested Filter Replacement Cycle
Primary Efficiency Filter: 7-15 Days
Medium Efficiency Filter: 3-6 Months
High-Efficiency Filter: 6-12 Months
Specification
Material: Silicone, POM Plastic Steel, Activated Carbon, Rubber
Color: White
Mount Type: Tabletop
Motor Type: DC Brushless Motor
Filtering Type: Adsorption Filtration
Filter Element Type: Cotton, HEPA, Activated Carbon,
Effective Absorption Distance: About 15cm/5.91in
Number of Filter Layers: 3
Power Type: Corded Electric
Plug Type: US Standard
Voltage: AC110V 50Hz
Power: 100W
Noise: <45dB
Air Volume: 0-225m³/7945.8ft³/h
Filtering Effect: 3μm 99.99%
Air Inlet Interface Diameter: 7.5cm/2.95in
Extraction Tube Diameter: 7cm/2.76in
Extraction Tube Length: 80cm/31.5in
Product Size: 29*24.5*32.5cm/11.42*9.65*12.8in
Package Size: 43*34*32cm/16.93*13.39*12.6in
Gross Weight: 8.5kg/18.74lbs
Net Weight: 8kg/17.64lbs
Package Included
1* Fume Extractor
1* Power Cord
1* Medium Efficiency Filter
1* High Efficiency Filter
5* Primary Filters (One Already Installed In The Product)
1* Extraction Tube
1* English Manual
Notes
- Please read the operating manual completely before use, and pay particular attention to the safety instructions included.
- Due to the varying levels of pollution generated in different situations, the replacement cycle of the filter element needs to be based on the actual situation.
- When the air volume is weak and there is a significant decrease in suction, please check in time whether the air inlet and filter element are blocked, and whether the filter element needs to be replaced.
- Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.