10 USA MADE NOS 8 PIN OCTAL VINTAGE CFK TUBE SOCKET

Slide Slide Slide Slide Slide Slide Slide
$24.99
Brand
Amphenol
Type
Tube Socket
Country/Region of Manufacture
United States
Unit Quantity
10
condition
Open box
You can buy the cheap import sockets, but there is nothing like a good old USA made socket.
These were made by CFK.  I have had them about 20 years and they came from an electronics cleanout that sat untouched since the 1970's. 

What is nice about these sockets is the holes have a threaded boss so you can just use machine screws to fasten these sockets from the top without fumbling around with nuts on the bottom. 

Mounting hole spacing is a pretty common 1-11/16"

You will receive 10 pieces. 

Ebay tends to double shipping for multiple quantities.  I will refund extra shipping on those purchases. 



Contact me before you purchase if you have any questions.

I have over 40 years as a BSEET technician and over 50 years as a hobbyist.    I have been collecting tubes for 40 years and have amassed about 10,000.  I first became addicted to tubes when I got my first tube radio around 1975.   I graduated college in 1985 and spent a lot of time involved in embedded microprocessors and digital electronics, but tube electronics have always been my love, and I stayed involved in tube electronics as a hobbyist.  Something about that warm glow.....

I've been on Ebay since 2000 as a buyer and seller. This is the only seller account I have on eBay and the pictures you see are of the actual tube(s) you’ll receive (unless you are buying from a multiple-quantity lot, in which case the tube shown will be representative).

Tubes are described, tested, and presented to the best of my ability, subject to the limitations of the equipment that I have available Which is 2- Hickok 539C testers, 2- RCA WT100A Lab Testers and a New London 901A Lab Tester.  I also have 2 Tektronix 576 curve tracers which I use for semiconductors.  

Test results are likely to differ between your equipment and mine due to many factors. Also be aware that “matched” tubes might not match on your equipment, if operated/tested under conditions that differ from those of my test equipment.