Thank you for visiting our store. We would like very much to be your quality RF Connector source.
Your purchase will consist of Ten (10) RFC 63-1SP-3279 Silver PL-259 straight solder connectors and Ten (10) RFC 63-58S (UG-175) Silver Reducers for RG-58, RG-141, RG-142. RG-400 and LMR-195 coax, and other coax with an outside diameter of .195-inches. The 10 reducers are sealed in factory packages. Without the reducers, this connector may be used with RG8, RG-213, RG-214, Belden 9913, Belden 8214, LMR-400 and other 400 series coax cables.
We have these same 10 PL-259's with 10 RFC 63-89S Reducers for RG-8X (mini-8), LMR-240, and other coax with ~ .240-inches including RG-59 in another auction which is EBAY item number 150550198540
Included with your purchase is the product data sheet with mechanical drawing, coax cable stripping dimensions and assembly instructions for with & without reducers. Personal, friendly and fast shipping service is also included.
Look closely at the fit & finish of this connector. We've provided a photograph of the actual connector, not a stock, representative or generic photo or drawing.
Generic, stock or representative photos, copied from manufacturers websites, are often used when selling inferior items, or an entirely different item.. Why would a seller not photograph the actual product he wants to sell?
Soldering is a craft requiring proper tools including the correct solder alloy, correct flux content, correct heat and other tool aids. It requires proper preparation of the components to be joined and it also requires skill. Years ago, minimal soldering skills could accomplish acceptable soldering connections for RF connectors on coax.
Today, low loss coax cables such as LMR and others, use gas-injected foam technology replacing the old solid polyethylene dielectric (insulator).This technology, while creating a superior conductor, has conversely introduced a potential problem, especially for the occasional solderer. A little too much heat applied during the soldering process, can easily result in damage to this temperature sensitive foam insulator, resulting in distortion and melting, creating a brown, tarry substance ultimately resulting in impedance characteristic changes to the cable.
My suggestion / recommendation for all levels of soldering skills is to always use connectors with a Silver Plated body and tip, which not only greatly speeds up the soldering process helping eliminate overheating, but also enhances RF signal flow.
Mechanical: Superior quality construction. The connector body, shell and center pin are all 30-micron silver plated. The premium silver plating assures a quick and positive soldering experience. The dielectric is DuPont™ Teflon® known for its inert properties, permittivity, strength, and higher withstanding voltages over a wide range of frequencies and temperatures. We've received nice comments about this connector from many purchasers in our feedback.
Electrical: 50-Ohm impedance, variable, DC to 300-Mhz (Commonly used up to 512-Mhz range), Voltage Rating of 500V Peak. Operating temperature range is from -65C to 165C (-85F to 329F). RoHS Compliant by Directive 2002/95/EC.
We gladly combine shipping with our other items.
SHIPPING INFORMATION: Free Via First Class Mail with 2-5 day normal delivery time.
INTERNATIONAL SHIPPING: is via EBAY Standard Shipping program.
Email with questions.