10 Thermal oil candle glass wick holders perfect for your mason jar candles and rock candles. This glass wick holder is 30mm length with a top flange width slightly over 1/2" approximately 13mm wide. Perfect for oil candles and oil lamp designs, this glass wick holder has a flange width that is slightly larger making it great for rock candles with the top being a 3 mm flat design. Each wick holder includes an 8" section of fiberglass wick to fit.
You may purchase extra wick at OilCandleSupplies to fit this wick holder - Oil Candle Wick Cotton/Fiberglass 3.2mm or our FWS18 Loose Weave Fiberglass Wick
To insert the wick into the wick holder just compress the wick end and feed the wick into the bottom of the tube and use an upward twisting motion. The wick will feed right to the top then pull it though!!! VERY SIMPLE!
Dimensions:
3 mm thick flange top
Flange width of 13mm (slightly wider than our 1/2" flange wick holders).
Tube length of 27mm - just over 1" under the flange.
Overall Tube Length is 30mm about 1 1/4"
6mm outside tube diameter
Inside tube diameter opening of 4mm
Drill holes 3/8" to prevent breaking the tube and this allows the candle to breathe, Use with brass rings to fit larger openings.
You may purchase extra wick at OilCandleSupplies to fit this wick holder - Oil Candle Wick Cotton/Fiberglass 3.2mm or our FWS18 Loose Weave Fiberglass Wick
To insert the wick into the wick holder just compress the wick end and feed the wick into the bottom of the tube and use an upward twisting motion. The wick will feed right to the top then pull it though!!! VERY SIMPLE!
Dimensions:
3 mm thick flange top
Flange width of 13mm (slightly wider than our 1/2" flange wick holders).
Tube length of 27mm - just over 1" under the flange.
Overall Tube Length is 30mm about 1 1/4"
6mm outside tube diameter
Inside tube diameter opening of 4mm
Drill holes 3/8" to prevent breaking the tube and this allows the candle to breathe, Use with brass rings to fit larger openings.