1/8" Rubber Edge Trim 6.6 ft for Sheet Metal, Car Doors, Hatches, Table Corners

Slide Slide Slide Slide Slide Slide Slide
$17.1
Brand
uxcell
MPN
Dose Not Apply
UPC
683867599346
condition
New
Document

    1/8" Rubber Edge Trim 6.6 ft for Sheet Metal, Car Doors, Hatches, Table Corners

    1/8" Rubber Edge Trim 6.6 ft for Sheet Metal, Car Doors, Hatches, Table Corners1/8" Rubber Edge Trim 6.6 ft for Sheet Metal, Car Doors, Hatches, Table Corners1/8" Rubber Edge Trim 6.6 ft for Sheet Metal, Car Doors, Hatches, Table Corners
    Flexible U Channel Edge are a very flexible material. They are widely used in the manufacturing, construction and automotive industries. Rubber Seal Strip can cover keen edges of metal, plastic or glass to prevent accidental cuts or scratches, or be used to seal the edges of car doors and windows to keep out water and noise. They can also protect delicate components in electronic products from damage and add an artistic touch to any space.

    Specification
    Color: Black
    Material: NBR
    Card slot width: 3 mm/0.1 inch
    Width: 4 mm/0.16 inch
    Height: 10 mm/0.4 inch
    Length: 2m/6.6 ft
    Trial board range: 2-3mm/0.08-0.12 inch
    Packing List: 1 Pcs x Rubber Edge Trim

    Advantage
    The rubber edge trim can withstand temperatures from -22F to +212F, is resistant to high and low temperatures, has good oil and wear resistance, is not easy to age, and has a long service life. The rubber trim can surround the keen edge and make it soft and smooth. It not only protects personnel, but also reduces the wear of the edges. At the same time, it can also isolate noise and dust.

    Instruction
    "How to install a rubber edge trim
    1. Clean the edge where the edge protector is to be installed
    2. Measure the angle and cut a 90° angle with right-angle scissors
    3. Put the U-shaped groove of the metal edge protector on the edge
    4. Apply glue to the inside of the U-shaped groove to complete the installation"

    NOTE:When using U channel edge trim, please measure the angle before trimming to avoid swelling caused by mismatched edge angles.
    Hot Item
    • We accept eBay payment.
    • Please do not email us to ask for other payment option.
    • We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
    • Usually we ship your order out within 24 hours in business day.
    • For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
    • Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
    • Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
    • If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
    • We are continually expanding our product selection to better serve your need.
    • We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
    • If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.

      1/8" Rubber Edge Trim 6.6 ft for Sheet Metal, Car Doors, Hatches, Table Corners

      1/8" Rubber Edge Trim 6.6 ft for Sheet Metal, Car Doors, Hatches, Table Corners
      Flexible U Channel Edge are a very flexible material. They are widely used in the manufacturing, construction and automotive industries. Rubber Seal Strip can cover keen edges of metal, plastic or glass to prevent accidental cuts or scratches, or be used to seal the edges of car doors and windows to keep out water and noise. They can also protect delicate components in electronic products from damage and add an artistic touch to any space.

      Specification
      Color: Black
      Material: NBR
      Card slot width: 3 mm/0.1 inch
      Width: 4 mm/0.16 inch
      Height: 10 mm/0.4 inch
      Length: 2m/6.6 ft
      Trial board range: 2-3mm/0.08-0.12 inch
      Packing List: 1 Pcs x Rubber Edge Trim

      Advantage
      The rubber edge trim can withstand temperatures from -22F to +212F, is resistant to high and low temperatures, has good oil and wear resistance, is not easy to age, and has a long service life. The rubber trim can surround the keen edge and make it soft and smooth. It not only protects personnel, but also reduces the wear of the edges. At the same time, it can also isolate noise and dust.

      Instruction
      "How to install a rubber edge trim
      1. Clean the edge where the edge protector is to be installed
      2. Measure the angle and cut a 90° angle with right-angle scissors
      3. Put the U-shaped groove of the metal edge protector on the edge
      4. Apply glue to the inside of the U-shaped groove to complete the installation"

      NOTE:When using U channel edge trim, please measure the angle before trimming to avoid swelling caused by mismatched edge angles.
      Hot Item
      • We accept eBay payment.
      • Please do not email us to ask for other payment option.
      • We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
      • Usually we ship your order out within 24 hours in business day.
      • For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
      • Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
      • Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
      • If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
      • We are continually expanding our product selection to better serve your need.
      • We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
      • If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.