1/3HP 79Gal Aquarium Chiller Ice Bath Water Chiller Hydroponic Fish Tank Cooler

Aquarium Chiller 79 Gal, 1/3 HP Water Chiller Machine, Hydroponic Cooling System, Fish Tank Chiller with Upgraded LED display, for Axolotl Jellyfish

1: About the temperature of chiller:

The water temperature is affected by the volume of water, the ambient temperature, the material of the container and so on. Generally, the chiller can reduce the temperature to about 5-15° below the ambient temperature.

2: About the chiller not cooling：

(1) Please make sure the machine has been successfully powered on and the working indicator light is on.

(2) Please don‘t put the machine in a closed space.

3: About Convert ℃ to ℉:

Please press both the MODE and SET simultaneously to enter the P5 interface, press the MODE to enter the P6 interface, then press the UP to convert to ℉.

Specification:

Power：1/3HP

Voltage：110v 60HZ

Cooling Water Volume: ≤300L/79 gal

Temperature Controlled：68℉-79℉

Type: Air-cooled chiller  

Water Inlet & Outlet Specifications: Φ12 or 6 points outer wire

Material: Titanium heat transfer

Evaporator: Pure titanium coil (corrosion resistant)

Item Feature: Low Noise,Fast Cooling,Fast Cooling

[Essential for Hydroponics and Aquariums] The 79-gallon water chiller adopts compressor refrigeration, which sets the ideal water temperature at 64.4-78F/18-26°C for fish tanks smaller than 79 gal .The less water, the lower temp.

[Rapid Heat Dissipation] With two built-in fans and a large number of heat dissipation holes, this aquarium chiller provides powerful ventilation to dissipate compressor heat, better heat dissipation, better cooling effect.

[Low Noise] The chiller performs great at home, generating less than 40 decibels when the machine is running, which will not affect your daily life.If you put it in the bedroom, please bring your own earplugs.

[Easy Operations] Easy to set the temperature. This water cooler is equipped with English manual which is easy to follow, and it describes common problems such as installation, setup and troubleshooting.