Victory is Life!
Trust me - if you're out exploring the Gamma quadrant and you see one of these bad boys coming at you through a nebula...you're going to have a bad day and you should probably turn around! The Jem'hadar battle cruiser was the mainstay of the Dominion fleet. As big as a Galaxy class cruiser, armed to the teeth, and usually surrounded by a swarm of smaller fighter "bugs," the Jem'Hadar cruiser was the flying definition of FAFO.
This 1/2500 scale 3d printed solid resin model comes to you in 6 parts. It measures just under 11 inches in overall length and is very simple to assemble. Painting is recommended before assembly. Photos of the ship with the 1/2500 scale ERTL Galaxy and Sovereign class models are for size reference only - JUST the Jem'Hadar model is sold in the auction.
Trust me - if you're out exploring the Gamma quadrant and you see one of these bad boys coming at you through a nebula...you're going to have a bad day and you should probably turn around! The Jem'hadar battle cruiser was the mainstay of the Dominion fleet. As big as a Galaxy class cruiser, armed to the teeth, and usually surrounded by a swarm of smaller fighter "bugs," the Jem'Hadar cruiser was the flying definition of FAFO.
This 1/2500 scale 3d printed solid resin model comes to you in 6 parts. It measures just under 11 inches in overall length and is very simple to assemble. Painting is recommended before assembly. Photos of the ship with the 1/2500 scale ERTL Galaxy and Sovereign class models are for size reference only - JUST the Jem'Hadar model is sold in the auction.
*A note about 3d printed resin models: All 3d models will have small "bumps" from the printing support structure that you will need to sand off; this is best achieved with simple padded nail sanding files or modeler's sanding sticks. The 3d printed resin models I sell are washed in 99% IPA and cured under UV light before shipping, but you may want to allow them to sit in the sun or under a UV source for no more than 5 minutes or so for final post curing if you feel there is any tackiness to the resin surface (there shouldn't be). All resin models, regardless of design, should be washed with a mild abrasive such as Comet or Barkeepers friend before priming and painting.*