This product is a 1:18 or 1:24 scale car model lighting modification electronic module kit. It does not include the car model or other decorations. Please read the product description below carefully to avoid purchasing errors.
Package Contents:
Pre-soldered electronic module*1 (with LED beads)
Remote controller*1 (for light control)
Charging module*1 (external charging use, Type-C interface, not for installation in the model)
Simplified manual*1
(Note: Features vary by purchased option. Unselected features will not be included. Please verify your chosen option.)
Headlight and taillight functions
Independent turn signal and hazard warning light functions
Police light function
*(1 inch = 25.4mm; all dimensions in mm)*
Standard battery: Rechargeable 60/30/30 model (thickness 6mm, length 30mm, width 30mm). Includes charging port for maintenance-free use after installation.
Main control module size: ~9.8mm*13.7mm
Headlights and taillights use 2835 LED beads by default (length 3.5mm, width 2.8mm). Turn signals (hazard warning flashers) use 0805 LED beads (length 2mm, width 1.25mm). Police lights use 3014 or 4014 LED strips (length 3mm or 4mm, width 1.4mm).
Operation:
Turn on the main switch first.
Remote control buttons:
1: Headlight and taillight
2: Left turn signal
3: Right turn signal
4: Hazard lights
5: Police lights
6: One-touch activation of all lights
7: Turn off all active lights (individual functions can be disabled by pressing their corresponding buttons again).Functions can be combined (e.g., police lights + left turn signal). Unavailable features in your option will render corresponding buttons inactive.
A: 2 white headlights + 2 red taillights + 4 turn signals
B: 2 white headlights + 2 red taillights + 2 red & 2 blue police lights
C: 2 white headlights + 2 red taillights + 4 blue police lights
D: 2 white headlights + 2 red taillights + 4 red police lights
E: 2 white headlights + 2 red taillights + 4 orange Strobe warning light
F: 2 white headlights + 2 red taillights + 4 turn signals + 2 red & 2 blue police lights
G: 2 white headlights + 2 red taillights + 4 turn signals + 3 red & 3 blue police lights
H: 2 white headlights + 2 red taillights + 4 turn signals + 4 blue police lights
I: 2 white headlights + 2 red taillights + 4 turn signals + 4 red police lights
J: 2 white headlights + 2 red taillights + 4 turn signals + 4 orange Strobe warning light
K: 2 white headlights + 2 red taillights + 4 turn signals + 6 blue police lights
L: 2 white headlights + 2 red taillights + 4 turn signals + 6 red police lights
M: 2 white headlights + 2 red taillights + 4 turn signals + 6 orange Strobe warning light
Warnings:
This product contains batteries and small parts. It is not suitable for children under 14 years old. Keep it out of reach of children to avoid hazards.
During installation, ensure that the soldering points of the LED beads and the module do not come into direct contact with metal. Otherwise, it may cause a short circuit, resulting in malfunction or damage to the module.
Do not pull the wires during installation, as this may cause wire breakage and affect functionality.
Never puncture or compress the battery to avoid damage, which could lead to fire or personal injury.
Turn off the main power switch of the module before charging. Do not charge unattended, and keep the charging process away from humid environments and flammable materials.
Use only a 5V-1A or 5V-500mA charger. Fast charging is strictly prohibited, as it may damage the module or cause other risks.
Ensure correct polarity alignment when connecting the charging interface (red-to-red, black-to-black). Reverse polarity will directly cause a short circuit and pose a danger.
Monitor the charging board’s LED status during charging:
Solid red light: Charging in progress.
Green LED lit or blinking: Charging complete. Disconnect promptly.
If the LED turns off immediately after plugging in, check for reversed polarity.
Despite built-in overcharge and short circuit protections, always unplug the charger immediately after full charge and strictly avoid improper charging practices.
- During installation, ensure the infrared receiver isn't fully blocked; this can hinder signal reception and prevent the remote control from working. Place it where infrared light can directly reach. Also, avoid putting the receiver near strong red or blue LED lights, as they may interfere with the signals. If you're unsure about the installation spot, test the signal reception several times during installation. This ensures the module works properly once installed.