1/2 HP Electronic Variable Speed Drive Motor & Control System 1270-4510 RPM New

Slide Slide Slide Slide Slide Slide Slide
$210.0
Model
1/2 HP DC Motor and Variable Speed Control
Modified Item
No
Custom Bundle
No
Speed Range
1270 to 4510 RPM
Motor Type
1/2 HP Permanent Magnet DC Motor
Control Type
Electronic Variable Speed Control EVS
Suitable for
Variable speed control above 1480 RPM
Rated Load
1/2 HP
Brand
Unbranded
condition
New

Kyozou Checkout

This is a 1/2 HP Permanent Magnet DC Motor with Solid State Electronic Variable Speed Control.

Please read the specs completely and carefully to be certain this will work for you:

  • 1/2 HP Permanent magnet DC motor
  • 1270 to 4510 RPM no-load speed range (as measured with a digital tachometer with control powered at 122 volts)
  • Clockwise rotation (facing end of motor shaft)(rotation can be reversed by switching the power leads inside control)
  • TEFC (totally enclosed fan cooled)
  • 2 Mounting options on motor face as follows:
  • (4) Screws on the motor face in a 2-5/32" (55mm) circle 90 degrees apart
  • (2) Openings on motor mounting bracket approximately 3-3/4" (95mm) apart to accept up to 5/16" (8mm) diameter bolts 
  • 5/16" (8mm) Diameter x 1-3/4" (45mm) long output shaft with flat for set screw
  • Motor body is 3-5/32" (80mm) diameter x 5-1/4" (154mm) long with mount bracket installed
  • DC Motor control (solid state)
  • Input power: 110 Volts / 3.2 amps / 1 Ph / 60 Hz
  • Controls motor speed from approximately 1270 no-load RPM (slightly delayed soft start) to 4510 no-load RPM (when powered at 122 volts)
  • Control box measures 5-1/8" long x 3-1/8" wide x 2-3/8" deep
  • With safety switch, variable speed control knob, built-in resetable circuit breaker, and fuse
  • Heavy duty 6 ft grounded cord
  • Screws included to mount control box and motor
  • Motor produces its best torque in the top half of its speed range
This is a complete motor / control package ready to be mounted to your lathe, drill, mill, or any other machine requiring a 1/2 HP variable speed drive. This system is brand new but will come in generic packaging.
 
Please study the pictures and email with any questions.  Thanks for stopping by.

PLEASE NOTE: We sell 2L pulleys and belts that fit this motor and help to reduce its speed.

Safety Note: It is the buyer's responsibility to determine if this high speed motor is suitable for your application, to mount it securely, and to operate it in a safe manner. Failure to do so may cause injury.
 
Shipping weight is 6-1/2 lbs.